Search results

  1. WANTED

    Question Code question

    Either the injector is going bad, clogged, or dirty. Can also occur if the connection is going bad or unplugged.
  2. WANTED

    6.4l Serpentine belt chirp noise fix

    So I finally had my transmission rebuilt, and the pump was not the issue in my case. What was the issue was my up-pipes, which were leaking and creating a chirping/squealing sound. Not even close to the sound of an exhaust leak I'm used to, but sure as hell the leaks were visible when the...
  3. WANTED

    6.4l Serpentine belt chirp noise fix

    It's the only thing that makes any sense. Thanks for helping me check.
  4. WANTED

    6.4l Serpentine belt chirp noise fix

    Did that. It's not nor is the seepage.
  5. WANTED

    6.4l Serpentine belt chirp noise fix

    To clarify about the leak, it appears to be seepage that is balling up on the bottom of the transmission. It's not actually dripping.
  6. WANTED

    6.4l Serpentine belt chirp noise fix

    I'm kinda getting the run around concerning potential worst case scenario costs (transmission rebuild and tq convertor replacement). The noise is definitely coming from that area, but otherwise the truck drives and shifts perfectly normal. I decided to dig a little deeper and drain the...
  7. WANTED

    6.4l Serpentine belt chirp noise fix

    I may have found my squeal, and I only wish it was a belt. I have good reason to believe it's either coming from my transmission or my tq converter. FML
  8. WANTED

    6.4l Serpentine belt chirp noise fix

    So I switched to the revised belt, and replaced both pulleys. Zero change. It's coming from the general area of the fan and am starting to wonder if this could possibly be my water pump or something else associated. You don't by chance have good how-to on replacing the water pump, do you?
  9. WANTED

    6.4l Serpentine belt chirp noise fix

    Yeah, mine sounds nothing like that. I'm pretty sure the TSB is at play too. Thanks for your help.
  10. WANTED

    6.4l Serpentine belt chirp noise fix

    Would it be a constant squealing if it was when the motor is hot, or would it periodically come and go? The only other condition under which it happens is when the truck is under acceleration when it does occur. If I increase acceleration for a bit, I can get it to go away. I have no...
  11. WANTED

    6.4l Serpentine belt chirp noise fix

    I personally replaced both tensioners and belts. I still get the squealing or chirping. Always happens when it's cold but does eventually go away. I occasionally get it on and off again on long road trips. Hit or miss if it it occurs while driving around town. I tried the water trick to no...
  12. WANTED

    6.4l Serpentine belt chirp noise fix

    Ever hear of the fan clutch being the culprit? I have a periodic squealing that that I've sourced to that general area. I've already replaced both belts and tensioners.
  13. WANTED

    AC belt replacement. Who's done it and how?

    So I got it done yesterday, and I did not see the "cut" you were talking about. I'm wondering why our surrounds are different. What I ended up doing was remove the main accessory belt tensioner to get to the ac belt and tensioner. Using an ac delco tensioner tool, I removed the ac belt and...
  14. WANTED

    AC belt replacement. Who's done it and how?

    Or, now that I'm further thinking about it, are you saying the rear part of the shroud that surrounds the fan ought to be cut? If it is this, then it sounds like it is possible to work that belt around the fan regardless but it just takes a little longer. Am I wrong in this assumption?
  15. WANTED

    AC belt replacement. Who's done it and how?

    ??? The upper shroud is held down by four bolts. I've been able to get it off completely in about 10 minutes without cutting it previously. Are you saying I need to cut the lower shroud? Somehow that doesn't sound right.
  16. WANTED

    AC belt replacement. Who's done it and how?

    So I've been experiencing the dreaded belt squeal. I was certain it was the main accessory belt as the tensioner was showing signs of failure. I replaced it, the belt and all the associated pulleys. Yet unfortunately it's still there. Only one left is the ac belt and tensioner. SO, anyone...
  17. WANTED

    Drain valve on the rear fuel filter snapped off. Any words of wisdom and/or......

    I forgot I posted this. First and foremost, this repair was an absolute snap. Obviously I'm not the only one that's had this problem. The fuel lines do not have to come off, nor does the entire cover of the air/fuel separator. I had no issues with bleeding the air either. Priming was a snap...
  18. WANTED

    K&N Filter

    I don't agree to this being the case only because my truck uses a MAF and not speed density. Because the air is metered, it is extremely sensitive to change in air flow based on load and barometric conditions. No, the MAF was seeing too much air and doing what it was supposed to by attempting...
  19. WANTED

    K&N Filter

    I realize mine is only a 6.4, but I have a little personal experience recently with a drop in K&N as I too did not exactly believe the hype. I bought one a month ago and experimented quite a bit. What I found was that a K&N drop in filter indeed did allow for too much air flow and caused my...
  20. WANTED

    Drain valve on the rear fuel filter snapped off. Any words of wisdom and/or......

    Slight correction on the parts I'm getting. Ford actually has the valve itself as a replaceable kit. I just ordered it, but seeing as they sell it that way I find it rather unbelievable that this hasn't happened to anyone else. But since no one cares to share their experience, once I get the...
  21. WANTED

    Drain valve on the rear fuel filter snapped off. Any words of wisdom and/or......

    FML. I was starting the fuel filter replacement on my 6.4 F250 which in and of itself extremely straight forward. As I was open the drain valve for the rear filter the lever snapped off when it was half way open. Given the way it broke, there's no possible way to ensure the valve will fully...
  22. WANTED

    Doing the DPF (maybe even the EGR) and a tuner, but need clarification/direction

    One additional clarification to my question, in looking at what I can find on the "maps" for the tuning modules, the only one that has close to some specificity is the SCT tuner. The listing I found of options shows DPF and EGR elimination not being an option??? Somehow, that doesn't sound...

Members online

No members online now.

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58
Top