Search results

  1. jeffnzoya

    Just shut down

    My brother has an 05 Excursion, 6.0 diesel. Yesterday we were on our way back home running on the interstate about 75mph on cruise. As he was comeing up on traffic he pressed the brake to release the cruise and the truck just shut down. We had it carried to the local Ford dealer and was...
  2. jeffnzoya

    Warning light

    My brother say's his 05 excursion has a light on in the dash that say's the door is adjar. Also, when he first get's in the truck the interior light stay's on for about 5 minutes. Has anyone had this problem? Thanks Jeff.
  3. jeffnzoya

    New wiring harness for 6.0

    My brother's excursion has a miss at 1200 rpm and up. Has anyone ever replaced the harness on their truck and if so, for what reason and did it help. thanks Jeff.
  4. jeffnzoya

    Stock Excursion 1/4 mile times

    My brother took his 05 Excursion down the track the other day and it ran 19.3. I told him that seemed big time slow. What's the average time/mph for these trucks.
  5. jeffnzoya

    Bad Miss and power loss

    My brother has an 05 Excursion with the 6.0 diesel and it had developed a very bad miss. After haveing a Ford tech put the truck on a computer he was told that the #2 injector was bad as well as the fuel injection module. A new module and injector, $950.00 later the truck still misses...
  6. jeffnzoya

    Edge programmer?

    My brother has an 05 Excursion and has found a used edge with additude programmer. It's in a box and has several wires and cords that look like they plug into the factory wiring harness. It say's on the back of the little black box, "edge 10002 ver 5.3. The additude monitor is ver 1.29...
  7. jeffnzoya

    Fuel pressure 444E

    A few months ago, I shimmed the fuel pump on my 00 7.3 increasing the fuel pressure to 70psi and have been happy with the results. I also own an 97 international with the 7.3 and hope someone will post instructions on how to do the same to it. The current pressure is pulsing between 38...
  8. jeffnzoya

    SCOTTY....I need more power!!!

    Left out Sunday for Edisto Island, SC with our 29 Foot FWT IN TOW. As soon as I got started I noticed that the camper felt quite a bit heavier than I remembered it last. I was watching my boost guage and 19 psi for about a second was all I could get. I was expecting more with the heavy...
  9. jeffnzoya

    Checked out an edge with attitude today

    My cousin has an 08 super duty with 9k miles and while it is in the shop for the 6th time, (allready had the cab off twice), he was given an 07 250 to drive. It has an edge programer, looks like 4inch duel's and a BD intake. Since I am looking into upgrading to a shift on the fly...
  10. jeffnzoya

    EDGE products

    A friend has a 2001 Dodge 2500 5.9 24v and was given a Power Edge Comp Module. While reading the instructions, he saw that it looks like there are alot of items missing from the box. it looks like it was shipped in April of 02. Also, the instructions show alot of connections ie the...
  11. jeffnzoya

    7.3 Engine ID question

    I think the shop that did my engine swap screwed me. I was suposed to get my old engine back complete, less the turbo and y pipe which they had to use on my engine, (the new engine came out of a 02 van with no intercooler). To make a long story short, all I got was 2 heads a HPOP, water pump...
  12. jeffnzoya

    Clearence around filter

    I am kind of wondering if I may be loosing some air with my diy setup. The factory tubeing off the turbo is connected to a 4'' piece of stainless exhaust pipe about 8 inches long. The pipe is connected with another piece of factory tubeing to a napa 6637 filter that sits where the factory...
  13. jeffnzoya

    Was told to upgrade chip

    I was talking to a guy from (one of the advertisers on this site) and we started talking programmer/chip ect. I told him that I had a 80 hp superchip (the one that plugged into the computer) with the off road program and he told me that the technology had so far advanced that chip that a 50 hp...
  14. jeffnzoya

    Where do you connect the fuel pressure guage

    I wan't to install a fuel pressure gauge in my truck. Could someone tell me where (looking down on the fuel filter canister) you hook up the line. Thanks Jeff.
  15. jeffnzoya

    My first Alt fuel post

    I own a family style restaurant that has about 5 gal of WVO per week. A few years ago I looked into purchasing a fuelmiester system but the cost was $2900.00. I felt at that time that it was to expensive for 5 gal a week. Now 5 gal = $22.00. I have read some of your posts and see that...
  16. jeffnzoya

    This could get ugly!!!

    Today while trying to expand the tip's of my uppipes, The nut off of the end of the expantion tool came off and where would you think it went. Down my drivers side uppipe. I stuck one of those magnets down the tube but had no luck. Looking at the design of the manafold, it looks like it would...
  17. jeffnzoya

    New Wastegate actuator?

    This morning at 9am I started the dismemberment of my engine/parts in search of my boost robbing exhaust leak. Both joints are loose and obviously leaking alot and both pipes were flopping around while I was removeing the turbo. Since this is the first turbo I have ever held in my...
  18. jeffnzoya

    New VCG's

    As per recent posts, and discussion of my intermitant (I think that is spelled correctly) miss, I have purchased my new VCG's. While doing this repair, I plan on doing the ccv mod, clean and paint the intercooler tubes and clean and check all the boots. I also plan on removeing the turbo to do...
  19. jeffnzoya

    Y pipe exhaust leak

    I have a lot of soot where the Y pipe connect's and can only get 16 lbs of boost. I have been told that a small exhaust leak can cause big time boost problems and since it is almost camper time, it's also time to fix the leak. During one of my posts, someone mentioned that this is a common...
  20. jeffnzoya

    Pull the Tranny?

    It has been determined by a few of you and I agree, that my low boost psi (16) with an 80 hp off road superchip and DIY intake is being caused by my exhaust leak behind the turbo whee the y pipe connects. I have been told that it may be easier to pull the transmission and go in from the...
  21. jeffnzoya

    DIY INTAKE

    I have read quite a bit about the DIY INTAKE. Me being a DIY kind of guy I decided I would give it a try. The instruction I found said I need a 6637 filter from NAPA. A piece of 4 inch pvc and 4 4inch clamps. I went by the muffler shop and got a piece of 4 inch exhaust tubeing instead of the...
  22. jeffnzoya

    Starting with FUEL PRESSURE

    Hello. My first post. To make a long story short. I have an 00 F250 crew 4x4, auto with 180k. 4 inch exhaust with 80 hp superchip installed. My story: Purchased the truck with 104k. Could not be more pleased with performance/power and overall smoothness of engine. @ 170k, while...

Members online

No members online now.
Total: 99 (members: 0, guests: 99)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,627
Latest member
castellscl

Latest posts

Top