Recent content by bigo
-
B
Front Auto Lock hubs - OEM
I will probably be interested in that slightly used hub assembly!- bigo
- Post #33
- Forum: 99+ 7.3L PowerStroke Engine & Drivetrain
-
B
Front Auto Lock hubs - OEM
I jacked up the truck and checked for play. I did not notice any obvious amount of play other than the small amount in my slightly loose ball joints. I replaced the hub and the noise is gone. The truck handles much better on the highway but I still think it wanders a little more than it should...- bigo
- Post #32
- Forum: 99+ 7.3L PowerStroke Engine & Drivetrain
-
B
help.....front end
I replaced the hub assembly. Noise is gone. In the process i noticed the slide pins for the brake caliper were frozen up. I heated them up with a torch(stuck REAL BAD) and beat them out, wire wheeled and greased them. No more pulling to one side during braking :). I do need to replace the seals...- bigo
- Post #4
- Forum: General Super Duty Discussion
-
B
help.....front end
HELP!!!! I had a rotational noise on the front of my 99 4x4 7.3 superduty. another thread led me to believe the hub was the problem. I pulled the hub off(following a WIKI) tonight. No visible damage to the hub. Cant feel any play between parts with hub in my hand. The spline that the hub slides...- bigo
- Thread
- Replies: 4
- Forum: General Super Duty Discussion
-
B
Front Auto Lock hubs - OEM
HELP!!!! I had similar symptoms on my 99 4x4 7.3 superduty. I pulled the hub off tonight. No visible damage to the hub. Cant feel any play between parts with hub in my hand. The spline that the hub slides onto shows play in the spindle. there are rubber rings floating(seal flanges?) between the...- bigo
- Post #29
- Forum: 99+ 7.3L PowerStroke Engine & Drivetrain
