Recent content by seanyounk

  1. seanyounk

    02 4R100 into 99 Superduty

    I just put an 02 4R100 into my 99. The shifter seems a little hesitant and the indicator needle is off. My wife drives this truck a lot and I don't want her jamming it into the wrong gear. The Shifter cable and bracket that hold the cable onto the tranny are a little different. The bracket...
  2. seanyounk

    Rebuilding my 4R100 advice

    Change of plans. I found a rebuilt 02 for $600 on Craigslist and could not pass it up. I just put the 02 4R100 into my 99, now I have another problem. The shifter seems a little hesitant and the indicator needle is off. My wife drives this truck a lot and I don't want her jamming it into the...
  3. seanyounk

    Rebuilding my 4R100 advice

    Recieved a tech manual the other day. I got a tech manual from Oregon Performance Transmission the other day. I have read through it a couple times, Seems like a pretty in depth quality manual. It seems pretty simple to do. Possibly one specialty tool I might buy! Some body has to have...
  4. seanyounk

    Rebuilding my 4R100 advice

    New Ford Heavy Duty Tranny replacement A local shop (friend on mine)says Ford has a Heavy Duty tranny replacement for this one now. It is Model # 6U2Z7B000LRN. I can get it for significantly less than the approx $3600 MSRP. It would have a nationwide 3 yr warranty. Has anyone tried one of...
  5. seanyounk

    Rebuilding my 4R100 advice

    I am going to try my luck at rebuilding my 4R100 out of my 99 F250. Does anyone have a comprehensive list of part numbers I can use to save hours of agonizing research? I have stacked Edge chips with the attitude on dash module. Full 4" exhaust from the turbo. ATS turbo shroud. AFE stage...
  6. seanyounk

    7.3 Tranny Reverse problems

    Thanks for all of the input gentlemen I was hoping for a simpler temporary fix. I had an old Ramcharger and the reverse went out in it. It ended up being a $60.00 Reverse Solenoid when the Trans shop said I needed a whole tranny. I was hoping for something along these lines, or something I...
  7. seanyounk

    7.3 Tranny Reverse problems

    I had my tranny serviced at my local shop about 5 months back and soon after the reverse began acting up. It would sometimes not go into reverse, and I would have to push my truck back. Once down the road it would work fine. This has happened about 4 times in the last five months. I took it...
  8. seanyounk

    7.3 Tranny Reverse problems

    I had my tranny serviced at my local shop about 5 months back and soon after the reverse began acting up. It would sometimes not go into reverse, and I would have to push my truck back. Once down the road it would work fine. This has happened about 4 times in the last five months. I took it...
  9. seanyounk

    ReBuilding Injectors

    I would also like to know. Thanks in advance for your responses.
  10. seanyounk

    Monster Box or Suncoast? who has one and...?

    Does this include a torque converter commander? Are these important? Has anyone ever used an ATS, or know anyone who has used one. My local shop is really making me a good deal on labor, (I am not at liberty to say how much), and he will only use one of these. I don't think anyone around...
  11. seanyounk

    Monster Box or Suncoast? who has one and...?

    Has anyone ever used, or known anyone who used a tranny from ATS Diesel Performance? http://www.atsdiesel.com/ATSWebsite/PFord.asp Bill at CPS here in Salem swears by these. I respect him tremendously, but wanted to seek other opinions. This tranny is $4,300 with the torque converter and...
  12. seanyounk

    Lets see those SuperDuty Trucks!! (OFFICIAL PICTURE THREAD)

    Here is "ours" until I buy her a new car.... Look to the left. I cannot figure out how to post a full-size one on here.
  13. seanyounk

    ICP

    What problems were you having? I would like to know the symptoms in case my ICP goes out. Thanks, Sean
  14. seanyounk

    Waste gate

    Question I bought a 99 F250 Superduty PSD with 130K miles last winter and had stacked Edge with Attitude, AFE intake, and full stainless exhaust (no muffler) all put in rite away. I also had the ATS turbo housing put on it. I immediately noticed an awfull noise when I mash the throttle and it...
See more

Members online

No members online now.
Total: 52 (members: 1, guests: 51)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top