twt
Full Access Member
I rember reading about a valve that turns off the hot water so the vent air is cooler, anyone know where to find the write-up?
Question Hot water
- Thread starter twt
- Start date
King0581
Full Access Member
Are you talking about the mod where you tie into the vacuum lines behind the glovebox or are you just wanting to put a shutoff valve in the heater hose?
lots of folks just put a ball valve in the heater core / supply line
and shut it off the flow of hot coolant to the heater core for
the summer.
or you can use this adjustable valve from dieselsite.com
http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=21
and shut it off the flow of hot coolant to the heater core for
the summer.
or you can use this adjustable valve from dieselsite.com
http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=21
BJS
Full Access Member
the vacuum actuated valve can be sourced from a '00 ranger
FWIW ?I did the Heater Core By-Pass Mod with the Ranger valve, but I've found I miss the By=level for Heat in the winter. Bob, at Dieselsite sez they are going to introduce an 12v operated valve, selective in any blend posistion, A/C or Heat.
'Bout 2 weeks ago he said it should be available very Soon.
'Bout 2 weeks ago he said it should be available very Soon.
King0581
Full Access Member
It depends on which vacuum line you tie into. The red I think will only give you heat on the windshield and in the floor. But if you tie into the white vacuum line behind the glovebox it only cuts the heater core off in the max ac position. Explorers had the valve too. I got mine off a '96 model explorer.
Last edited:
twt
Full Access Member
Thanks for all the comments , I was talking about the vaccume lines but I think I will order the valve that bushpilot had a link to . Thanks again 
King0581
Full Access Member
I probably had $20 bucks in my AC mod all together.
