Question Fuel Pressure Gauge
- Thread starter JRJ04
- Start date
drmjf
Full Access Member
I hooked up regular oil pressure gauge to my truck. I did use 1/8" copper line instead of the nylon. 65 psi is not high pressure. It's working for me.
dpantazis
#12
j:
iirc,the fitting on the fuel bowl is NOT NPT, its a o-ring seal type.
there is a writeup on putting on a guage somewhere that had all the bits and pieces listed. the info might be in the regulated return wiki too.
EDIT: 1/8" NPT to #4JIC in the wiki page,
dp
iirc,the fitting on the fuel bowl is NOT NPT, its a o-ring seal type.
there is a writeup on putting on a guage somewhere that had all the bits and pieces listed. the info might be in the regulated return wiki too.
EDIT: 1/8" NPT to #4JIC in the wiki page,
dp
roosterdiesel
Earl needs B100
You'll need a fitting that's oring boss to go into the filter housing to whatever is on the end of your hose. I don't remember what the o-ring size -4 maybe. ITP sell an adapter to NPT I think.
I carry the O ring plug fitting that >was< in the filter housing.. in my bed box. (along with all the Other OEM plugs'n fittings from other Mods)
