Egr billet blockoff???

Todd Tumbleston · Sep 6, 2009

Dfuser has a EGR Billet blockoff for 79.99. Has anyone used this or would recommend it? I am planning on new head bolts within the next year or so. Then i'll go a delete...... What are the thoughts of just replacing the EGR for now with the blockoff? Thanks :dunno

HeavyAssault · Sep 7, 2009

By removing the EGR valve and using the blocker the hot exhaust gases will heat up the EGR cooler beyond the design limits. This isn't what you really want to do you want to block the exhaust flow at the EGR up-pipe that connects to the EGR cooler. The heated exhaust will not enter the cooler and flow directly to the turbo.

Todd Tumbleston · Sep 8, 2009

So what you're saying is that the guys who just unplug the EGR could have the same problem? I was trying to trace the three chambers that the egr valve connects when it's opened? ???????? TOP? MIDDLE? BOTTOM?

ckamp52 · Sep 8, 2009

i talked to bill at dfuser about this and i dont remember exactly what the differences were between the different parts he offers but it was better to buy the whole kit for like 400 bux. give him a shout and he will explain it to you. i got my studs egr kit and sct from him nice guy

Todd Tumbleston · Sep 8, 2009

Got my banks IC today, changed the oil, fuel filters and now am waiting for the other parts to get here friday...I ordered a gasket kit for my EGR today and it will be here A. M. tomorrow...........I'll just put the cleaned EGR back in and rip all of the EGR stuff out next year. I'll buy the complete delete kit... Thanks for the advise.. Todd

i-Henry · Sep 10, 2009

Has anyone installed the EGR up-pipe? How difficult was it. I'm a pretty good mechanic, but this is only my second diesel truck, so I always ask alot of questions before doing anything. I don't need an expensive lawn ornament.

HeavyAssault · Sep 11, 2009

I modded my own EGR up-pipe. If you got skinny long arms it's not too bad. Otherwise grab all the 1/4" drive extentions you got, remove the passenger tire and wheel well liner to help get access to the up-pipe mount bolts. There are some tight spots but it's worth the effort to get the mod done.

Egr billet blockoff???

Todd Tumbleston

Tumblestone

HeavyAssault

Full Access Member

Todd Tumbleston

Tumblestone

ckamp52

ckamp52

Todd Tumbleston

Tumblestone

i-Henry

Full Access Member

HeavyAssault

Full Access Member

Members online

Forum statistics

Latest posts