overheating issues!!!!!!

Todd Tumbleston

Tumblestone
Joined
Feb 7, 2007
Messages
81
Reaction score
0
Location
Oroville, Washington
OK, New intercooler installed, oil changed, distilled water flush with extended coolant, new fuel filters. Hauled the camper to Idaho with 62 chevy in tow... went up the hill and it Overheated but cooled.... Dropped off the truck and back.....up the hill..(we're talking about a 4000ft or so mountain pass.... overheated.... it's blowing coolant from the cap....then it cools down and is fine. I overheated once not long before I blew the intercooler and before all the work..... If i go out the next day and unscrew the coolant cap.... it's still under pressure. Could it be a thermostat????? the oil looks good, no smoke of anykind from the straight pipe exhaust. I went back to stock tune but still lost some coolant from the cap....Thanks Todd:dunno
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
Sounds like a blown head gasket. Have someone check the coolant for combustion gases. The clue here is - overheating under load.

Dave
 

Todd Tumbleston

Tumblestone
Joined
Feb 7, 2007
Messages
81
Reaction score
0
Location
Oroville, Washington
Aaarrrrrrgggggghhhhhh?#%@&*&^#%

Crapola, that is what i'm fearing.....:eek: If I replace them i'm going with the fancy dancy head bolts.... I guess that way it won't do it again.... Living in BFE, I don't have a lot of choices.... How hard is it to pull the heads and replace the bolts.... Is there a lot of crap that has to come off?:dunno
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
The cab of the truck has to be lifted to get the heads back on after the studs are installed. Get a manual for your truck at www.helminc.com and check it out. The whole process is not easy or cheap! A big pain in the &**.

Dave
 

Todd Tumbleston

Tumblestone
Joined
Feb 7, 2007
Messages
81
Reaction score
0
Location
Oroville, Washington
Offa to the Fordman with the &%#* truck..... I asked if he would install the ARP head bolts and he never heard of them..... Living in BFE sucks. Probably a hillbilly shadetree mechanic working for ford at 10 bucks an hour...There's no place like home... there's no place like home ..Waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa:violin
 

Todd Tumbleston

Tumblestone
Joined
Feb 7, 2007
Messages
81
Reaction score
0
Location
Oroville, Washington
Fordman says its the EGR cooler or the Headgaskets....Won't need to remove the cab to fix the head gaskets! Do you or do you not have to on the 03? I thought it was only on the 08 and later!
 

Members online

No members online now.

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58
Top