Help Needed 4 wheel drive not working without hubs turned

brow300mag

SDD Junior Member
Joined
Aug 7, 2007
Messages
4
Reaction score
0
Location
pa
The four will not work without turning in the hubs on the truck. I imagine it is some kind of vacuum system leak, but I was wondering how much work is involved in the fix or if I am better off taking it to a shop? Seems like a common problem among Superduty's! 05 - 6.0
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
There is a vacuum line going to the wheels in the front end, like the brake lines. This is what locks in or out the hubs. Make sure they both are connected on each end. WHAT DO YOU DRIVE?????
 

JLDickmon

ursus combibo
Joined
Jun 22, 2006
Messages
4,173
Reaction score
12
Location
49041
The four will not work without turning in the hubs on the truck. I imagine it is some kind of vacuum system leak, but I was wondering how much work is involved in the fix or if I am better off taking it to a shop? Seems like a common problem among Superduty's! 05 - 6.0

yeah it is.. for a variety of reasons...
most common the vacuum lines come off, get knocked off, crack, etc.
less common are hub and seal failures, but they do happen.

most guys get tired of screwing with them and put on a set of Warn lockouts.
 

jonwright

Full Access Member
Joined
Feb 28, 2006
Messages
64
Reaction score
0
Location
Little Rock, AR
My hubs would stick in locked. I have an '03. Take the circlip off and the whole hub assembly just comes right off. Check the inner hubs to be sure they turn ok. Prolly do - sounds like a vacuum leak, though. But worth looking at.

Is your defroster working? :) If not, you may need a new vacuum pump. Not likely, but a line that came off or is cracked is more likely.

But I'd check the hubs nonetheless. Personally I chose to not mess with it and bought some Warn hubs (manual) when mine went out. Dealer wanted like $600 for 'em.
 

roger2003

Full Access Member
Joined
Apr 6, 2009
Messages
191
Reaction score
1
Location
Milwaukee,WI
I had the same problem with mine, I blew the seals. Tore them off and put manuals on and put bolts and silicone in end of the vacuum lines. Problem solved, so what if I need to get out of the truck to lock em in.
 

jccapri

SDD Junior Member
Joined
Apr 2, 2012
Messages
14
Reaction score
0
Location
garland,tx
ac blowing through defrost

if you have shift on the fry switch turn it to 4 high and see if your ac blows out the vents mine did
 

Members online

No members online now.

Forum statistics

Threads
30,510
Messages
266,056
Members
14,624
Latest member
Romie64
Top