Help Needed 2003 6.0 Died on the freeway

not4show

SDD Junior Member
Joined
Jan 6, 2008
Messages
2
Reaction score
0
Location
Oakley, CA
Driving along no issues, truck just died. Cranks no start.

No Codes on edge tuner(stock mode, bought for guage pack)

When cranking no RPM on dash.

No smoke,

FICM, TURBO, EGR, EGR cooler recently replaced

Need help!!

I don't have a scanner,
 
Last edited:

Stroked68

This is FORD Country
Joined
Apr 21, 2010
Messages
1,013
Reaction score
0
Location
Eudora, KS
Crank position sensor?? Dont know alot about the 6.0's. I know on the 7.3's if that cps goes out yer dead! And all it is is a lil sensor.
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
There are several sensors that can kill a 6.0 if they fail. The 6.0 is NOT known for faulty CPS. More likely your HPOP is almost gone. If you don't get 500 pounds oil pressure, it will not fire the injectors. You NEED a scanner to find out, OR take it to a GOOD garage and have them scan it. Must be able to read CAN to scan a 6.0.

Dave ;tu
 

JLDickmon

ursus combibo
Joined
Jun 22, 2006
Messages
4,173
Reaction score
12
Location
49041
I think I'd agree with Dave on this one.. check the ICP value..
 

KRISTOLSON

Full Access Member
Joined
Jan 30, 2009
Messages
291
Reaction score
0
Location
Thief River Falls, MN
I have had this happen twice. First time it was the injection control pressure (icp) sensor and the second it was the fuel injector control module (ficm). They both cost about the same, $1200 or so. Both happened away from home so I had to let someone else work on it. The icm had more parts, less labor. icp sensor had more labor, less parts. Since you just changed your ficm I would hope that is not it. You wont get codes on your edge but the shop will be able to diagnose in seconds with their reader. $120 diagnosis charge is well worth it at a good shop. 6.0 parts are way too expensive to throw them at a problem!
 
Last edited:

willie "D"

SDD Junior Member
Joined
Nov 27, 2011
Messages
15
Reaction score
0
Location
Oak harbor
Mine was the IPR (Injector Pressure Regulator), It's what regulates the High pressure oil, HPOP (high pressure oil pump) just moves fluid. If it fails open you'll never get the 500psi required for the ficm to fire the injectors.
 

Staff online

Members online

Forum statistics

Threads
30,511
Messages
266,060
Members
14,625
Latest member
woodrow58
Top