Bigdog
Full Access Member
Ok guys been a long time since my last post and i need to get this working again.
My 2002 7.3 will not start most of the time , you can crank it 4 or 5 times and on the 6 it will start and run fine or it will start first go or third , it starts when it wants too.
now i have changed the CPS and the ICP, i have 2 spare of each and still have the same problem , when cranking my HPOP reads 0 when it does not start but when it goes to start you see the needle move and oil pressure build to about 1000 psi and starts in about 3 seconds , run fine , drive fine, just do not stop it or it will be 10 to 15 mins before you can get it running again . To me its electrical, i just do not know where to start.
Thanks Guys
My 2002 7.3 will not start most of the time , you can crank it 4 or 5 times and on the 6 it will start and run fine or it will start first go or third , it starts when it wants too.
now i have changed the CPS and the ICP, i have 2 spare of each and still have the same problem , when cranking my HPOP reads 0 when it does not start but when it goes to start you see the needle move and oil pressure build to about 1000 psi and starts in about 3 seconds , run fine , drive fine, just do not stop it or it will be 10 to 15 mins before you can get it running again . To me its electrical, i just do not know where to start.
Thanks Guys
