Search results

  1. T

    Code P0332 Knock senser #2 on my F350 2015 Platunum

    Where is this senser located I also have P0541 Intake Air heater problem? any info would be great I cannot find any info in the search area for these thanks for the help
  2. T

    Question Damn 4x4 isn't working

    you can test the transfer case by leaving the engine off and key on the solenoid will shift the transfer case, you can here it. if you can not hear it the shift motor is bad on the transfer case. You cannot shift it into low range this way just high range.
  3. T

    6.0L Egr removal P0401 P0404

    My question is I have deleted my EGR and now I have several codes that keep showing up can I have the EGR system turned off or is there a plug I can buy and fool the system??
  4. T

    Wrench Light came on

    Wrench light We put a regen delet pipe and tune on it so at 2 am when im headed back from call for the fire department i dont have to drive the dam thing all night to reset it. the good thing the power is great and at least one to two miles per gallon better milage with the kit delet. Im sure...
  5. T

    Wrench Light came on

    Wrench light Yes i pull a training trailer with not a lot of weight but about 3k LBS this is jsut driving the truck i let off to slow down to go around a corner and soon as i mash the peddle after the corner it drops of and goes into limp mode. and yes the only way to fix it is pull over turn...
  6. T

    Wrench light reduce power

    Ok we have an 08 6.4 for the fire deparment. I posted some time ago about the dreaded wrench light well i thought we might have figured it out i was wrong. We changed the oil we changed all the fuel filters and it worked good for a long time well. The bad news i was driving it like a bat out of...
  7. T

    Heavy White Smoke and loss of coolant

    I should also mention if you delet the regen you void your warnty that. Also i forgot to mention when your rig go into regen it dumps about a quart of diesel in you motor oil on anverage we have had up to a gallon of extra in our oil changes. That is why it is so important to change the oil...
  8. T

    Wrench Light came on

    We have an 08 that has the same problem we were told by ford dealer that the fuel filter is pluged. We changed both bleed the system and we still have the same problem. When we pull the trailer hard up hill it will drop the power you stop shut it down to reset and away you go agine we are...
  9. T

    Heavy White Smoke and loss of coolant

    coolant lost and white smoke Ok here is what i know We have two at the fire department on has 50k on it the other about 5k ya. The white smoke is the regen system it is burning out the soot in the filter system if you do not keep the truck above 45 mph until the regen resets it starts over and...
  10. T

    Boot blow off

    Cool thanks :sweet
  11. T

    Boot blow off

    ok is that better i hope it all show pic. and info. any one have a good pic. of an o4 6.0 with a fuel gauge for testing under the hood so i can see exactly where to tap into thanks. :cool:
  12. T

    Boot blow off

    Yes that is true the pressure is what blows it off i was just thinking the added oil in the system work it way under the boots from expantion and contration of the turbo pressure this make the surface slick and the boots blow off. thanks for the info i here a slight whisle from mine turbo i...
  13. T

    Scan resulst question

    ok i see what you are talking about the number but when i scanned my truck it cleared the codes so i asume i have to drive it until they happens again then i can read them i saved the sesion but not sure where to find it yet. ok so i need a class on auto Eng. software lol im learning. Does this...
  14. T

    Scan resulst question

    Just adding a pic of my old truck that is my V10 now working on new 04 crew cab
  15. T

    Scan resulst question

    Ok here is what i have a SPO3 auto engunity computer based software with OBD II for all fords. not just one model i can ready any vehicle from 1999 to 2011's Oh ya i did see a FICM reading of 47 so from what im seeing is that is a good voltage for the FCIM correct.
  16. T

    Scan resulst question

    Yes i bought the Ford package and yes i could be reading it wrong i read the whole book and am just learning the use of it. Very in depth program and im not used to this computer age i Farmed my whole life and i rebuild anything pre-90's for the most part.
  17. T

    Scan resulst question

    Well the volt on the FICM was acually 13 to13.5 which is good Im still learning the scanner it is auto enginutiy this is a computer base program it does a tremedous amout of dat i can turn Injectors on and off things like that its not for every one i'll look again tomorrow and see if show...
  18. T

    Scan resulst question

    I scanned my truck today i've had a miss in it it show code Cylinder 4 Injector circuit contribution/Balance Fault Does this mean the Injector is toast and needs replaced? Also the Fuel Pressure is 720 PSI at Idle and abut 2100 to 2500. high not WOT. is this good for 04 6.0 Diesel fuel...
  19. T

    Boot blow off

    I have a question just wondering the old diesel trucks had a drop hose for engine crank pressure. couldn't you just take that out of the turbo system and place it in a down turn under the truck. would that help prevent the boot from blowing off?:dunno
  20. T

    New member

    04 Crew cab just bought
  21. T

    New member

    Hi yes im new im sure i will learn more than i can spend on my truck in one day lol :lmao

Members online

No members online now.

Forum statistics

Threads
30,531
Messages
266,103
Members
14,642
Latest member
Tylers11398677
Top