Search results

  1. rynarnell

    need help

    could always run on WVO....
  2. rynarnell

    Running rough

    DTC P1211. i got this code on my 94 7.3. I changed the fuel pump before the SES light came on because it was leaking out the weep port. Ran good for a while untill i started it one mornind it sounded like it was running on 4 cyl. When it warms up its a lot beeter but still not perfect. I just...
  3. rynarnell

    what 2 look 4?

    ya i baught the blue one with 83000 miles. Ive been driving it from wasilla to anchorage everday. and its running great.
  4. rynarnell

    what 2 look 4?

    theres another one thats the exact same but red with 63000 miles. Just had some more dents than the one that i baught.
  5. rynarnell

    what 2 look 4?

    im lookin at buying a 97 7.3 with 83000 miles. I drove it last night. Started right up in the cold and shifted fine. What else should i look for on these trucks? Thanks
  6. rynarnell

    EGT's question

    ok, thanks for you help
  7. rynarnell

    EGT's question

    At about 70mph im at 900' F pre turbo. I think my rpm's are around 1800rpm. Cause im still running stock 3.73 gears on 38" tires. If i regeared my truck to around 4.56. Thats supposed to get it close to stock power curve. Will that bring down my EGT's a little?
  8. rynarnell

    Whinning noise 06 superduty

    id say carrier bearing, or the pinion gear bearing isnt preloaded right.
  9. rynarnell

    Deeper Tranny Pans????

    I have the PML pan. It's the best cause it doesnt retain the heat like powder coated ones. And my temp has never gone above 160'F
  10. rynarnell

    Its 50 but starts like 25?

    i thought the 6.0's had Baro temp sensors...
  11. rynarnell

    thermocoupler install

    funny, i just got my gauges from diesel manor too. you dont need to remove the manifold. Just drill a small hole on the rear of the drivers side manifold up from the bottom. So shavings will fall. go up one bit size at a time to make shavings small. Then vacuume it out. then put the tip of the...
  12. rynarnell

    Diesel/Powerslot dealer shops in Oregon?

    try XTC trucks in Hood River Oregon. Hes a cool guy and will help you out.
  13. rynarnell

    bushwacker flares

    Has anyone powder coated or Sprayed the Fender flares with bed liner? I saw a truck with bushwacker fender flares that looked like they were sprayed with rhino or linx. Just wondering if anyone has done it and what they thought?
  14. rynarnell

    08 diff cover?

    well i just put on my cover. got some new bolts and used black RTV. Looks a lot better than the old rusty cover. It only took 3 quarts. So i have an 18 dollar quart of 75/140 synthetic left over.
  15. rynarnell

    Overhead Console

    me too!
  16. rynarnell

    MBRP power tube....

    give it a shot and let me know.
  17. rynarnell

    08 diff cover?

    oh and by the way Mercron SP is 5.16 a quart too up here in alaska.
  18. rynarnell

    08 diff cover?

    i ordered mine from the dealer. 55 bucks, supposed to be in today. Hopefully it comes with the longer bolts.. The thing that really pissed me off was i got 4 qts of the 75W140 synthetic. It was 18 dollars a quart!!!!! i know the dealer was probably not the best place to get the diff oil. but its...
  19. rynarnell

    Roll Call Alaska!

    hey cornboy, i live in wasilla. and commute everyday. Not in my truck though. Come check me out i work at vehicle maintenance.
  20. rynarnell

    Sway Bar for Lifted trucks?

    summit racing sells them
  21. rynarnell

    ATF as additive in 6.0??

    back in the day you could put fill up your fuel filters with atf. but now the injection pumps got viscosity compensators that adjust to the fuel and probably a bunch more technicle s%^$. Atf would mess it up and the injectors.
  22. rynarnell

    best aftermarket auto tranny?

    check out levelten's stage 3 kit for the 5R110 torqshift. Im trying to find out how much it is.
  23. rynarnell

    6.0 reliability

    i have an 03 6.0 with 59000 miles. And no problems with her. I havent put a programmer on it yet. Just a lift and tires. But i plan on getting the livewire.
  24. rynarnell

    NO GO 6.0!!!!

    check for a code. There might still be one even thought the light isnt on.
  25. rynarnell

    livewire w/ egt or sctII and gauges?

    I was looking at innovatives website. I saw they had the egt probe out for the live wire. I can get the livewire with the mount and egt probe and it would cost about the same as getting a 3 pillar pod with gauges and the SCTII. Any thoughts???

Members online

Total: 75 (members: 1, guests: 74)

Forum statistics

Threads
30,537
Messages
266,113
Members
14,658
Latest member
NattyGlee22

Latest posts

Top