Questions, What is the failure rate of the CP4 pump? What is the cause of the failure? and Is there any TSB on this?
If all is good, fuses, relay, etc., Then by all means Repair or Replace switch !
The first thing I would do, using a muti-meter, is probe the harness connector at the switch.
'Carbonation' is correct.
Drop the tank, and remove pump combo unit. Clean tank with a good cleaner.
Once you put everything back together, fill...
Click here; 2019 Super Duty Tech Specs (ford.com)
Also, Very Important! Take whatever you want to tow to a public scale!
Hey gary, I have a 2011 also. Have you load tested both batteries ?
carbonation, How do you think Alliant compares to Stanadyne ?
Just curious, I haven't used either one yet.
:thumbs Sounds good pizzaguy! Gotta like that extended warranty! I know I do. :mxmas Merry Christmas everyone! :sled1
Yeah, I would do it yourself! I did mine a few years ago. Not a bad job, straight forward. In the Chi town burbs, pads, rotor, bearings new should...
(+) pos. 7 pin trailer terminal ?? Please verify with meter.
Ok, Truck is back safe and sound and I'm 1200 lighter in the wallet!
As explained to me; "The EGR cooler assembly became clogged (they did not...
Maybe buy an assorted "O" ring kit? Search the internet, Call a bone yard or a parts supply house. What is your truck info.?
OK, Here is the latest update. Truck is at the dealer.
They told me that P20BA IS covered under Field Service Action 18MO1
However, P0401 is NOT...
At this point I'll check the EGR an probably replace it. Then I'll look into replacing the reductant heater.
Any suggestions, tips, or advice is...
rlaspinall, "...my filter was gradually failing and I would need to do a filter replacement in the near future." could you explain this filter?
Two codes appeared on my truck about a week ago.
P0401 and P20BA
I also get a warning message on the DIC, 'Low Exhaust Fluid' range 705mi....
Being an electrician for 35yrs. My first thought would be a bad relay.
I believe there is one that will shut off the wiper motor upon crank....
My first thought would be air in the fuel line.
Was system purged?
Are there any signs of air left?
SCAM! Seems like they are trying to drum up some business.
I personally don't do additives, others might have a different opinion.
I've heard users of Stanadyne swear by it. So more power to you!
You should be good. I think they changed the bearings for the 2013 model year.
First thing I would do is check your warranty guide. in there you will also find who to contact. (embellishment required; lay it on thick)
The 6.7's, 2011 and up, Do Not use standard anti-freeze. Instead they use a hi-tech coolant that has additives such as lubricants and...
Truck PAC 12/24 Volt Jump Starter - 3200 Peak Amp
Try FORScan: https://forscan.org/download.html OR TOAD: https://www.totalcardiagnostics.com/toad/
w/ELM327 cable (laptop USB to vehicle OBD)
Separate names with a comma.