Search results

  1. rgdillon

    Guess who I ran into today.

    Thanks :sweet I am so tired of finding eggs - by the smell - every June. Ron
  2. rgdillon

    Tires for 18" wheels

    And Maxtor also - I just a few months ago went all through this. I settled for the D rated BFG's and for me it's about the worst thing I did. My truck came with Goodyears - they make an 18" Load E rated tire. I should have gone back with that but was looking for more off road aggression...
  3. rgdillon

    it's here

    :thumbs To me too! And I'd like to add my Thanks! for your service :sweet We appreciate it! Ron E-5 82D 82nd Eng <---- Long Time Ago :)
  4. rgdillon

    Fuel: food for thought

    Here ya go - http://www.forddoctorsdts.com/ Ron
  5. rgdillon

    Fuel: food for thought

    Yep - And make sure that you bookmark the FordDoc's site - he has a ton of information there and is always adding stuff. I like to go there and just poke around. Ron
  6. rgdillon

    Hipp- err, I mean, Grizzly Man...

    NOTE: California beach drug addicits don't make good "bear experts" . . . I didn't see the movie - nor likely will I - but at some previous point, maybe on the Discovery channel, I remember seeing a show about him. Ron
  7. rgdillon

    hail divits

    You do know if you f*** it up - your screwed. Cost more money then. I'd call one of those "paintless repair" guys and let them go at it. Lot cheaper than if you over do it and make it worse. See if your insurance covers it. Mine does. Ron
  8. rgdillon

    seat beltminder disable ?

    You know - I wear my seat belt 100% of the time. But - when I am stopped, or moving around a job site, pull in and park and grab my notebook or something to make some notes, etc etc - I got tired of that damn thing going off all the time. In my 01 all you had to do was to push the release...
  9. rgdillon

    Mounting a laptop

    I started out with the Jotto desk - but later went ahead and built it into my custom center console. Click on my VB Garage pictures - link below in my signature to see it. Ron
  10. rgdillon

    getting tired of banks

    Exactly. The mags and tv shows don't put him on there cause he is the best - he simply is spending the money. Ron
  11. rgdillon

    New to Ford and new to the site.....

    There ya go! :sweet Welcome to SDD - :thumbs Ron
  12. rgdillon

    4 Wheel Drive Use

    I do that every now and then - put her in gear and all just to make sure everything is working good. Don't see how it could hurt anything - just being on the safe side. Ron
  13. rgdillon

    Smith and Wesson service?

    I have never sent anything to them - but if the local smith could not get it - I'd do the same. Sending the mags is most likely a good idea - could be the spring tension and all. I have my father-in-laws WWII service side arm - it's problem ended up being the mag. Picked up a couple "new"...
  14. rgdillon

    STOP SENDING MONEY TO ARAB TERRORIST!!

    Are you doing this on the 7.3 or one of the 6.0's? Assume since you mention the Hutch mod it's the 7.3. You might have said and I just missed it. If you haven't done so on the 6.0 - do you plan on it? Ron
  15. rgdillon

    +400 RWHP on a 7.3L?

    :sweet Yep - I got a dyno sheet around here from my one and only dyno run that shows 368. That's with just a quad box and cat back. As I was only able to do one run - I didn't get a chance to crank her up. Trying to make the Dyno day up in PA on the 29th of April - hopefully get some...
  16. rgdillon

    STOP SENDING MONEY TO ARAB TERRORIST!!

    So has anyone taken a glass jar of diesel - tossed in some soy oil - shook it up and then let it sit for a couple days? Be interesting to see if it stays mixed. Ron
  17. rgdillon

    06 f-250 6.0L power chip questions?

    I picked up two of them for $36.17 each - :D :D :D Brand new Motorcrafts in the box. That's what happens when vendors try to out price each other :thumbs Ron
  18. rgdillon

    06 f-250 6.0L power chip questions?

    Welcome to SDD :sweet Installing an AFE is not really upgrading in my opinion - it's just spending money is all. What you have is an excellent balance of air flow and filtration. Exhaust - take your pick on anything that is CAT back and your dealer won't complain. Programmers - Any...
  19. rgdillon

    STOP SENDING MONEY TO ARAB TERRORIST!!

    So ummm - what's being suggested here is that all soybean oil (and this would include the containers) is 100% US of A farm grown? Ron
  20. rgdillon

    Beat a dead horse?

    I agree with Bruce - and I run full syn year round - 5w30. Ron
  21. rgdillon

    looking at a SD 250, newb with questions.

    If the truck has gauges - maybe you should check that exhaust and make sure it's not already a 4". Not always - but for the most part - a truck with gauges may have already been chipped and exhaust. Tranny - remember that these trannies learn the way that you drive - don't stick a chip in...
  22. rgdillon

    Fishin' for a chip

    On the o4 you have a couple of choices. One would be a programmer - and hopefully no one would sell a truck with a program in it. Next would be a box. If you have one there should be a switch mounted somewhere. Removing your drivers side battery cover to get to your PCM - look at the three...
  23. rgdillon

    Readers Rides

    We have the vBPicGallery which is listed on the bar above. Be nice to have a link to it when you cursor over a members name though. Ron
  24. rgdillon

    What is an EGR And EGR Flow mean?

    Nope - no such thing as a stupid question if ya don't know - EGR's (Exhaust Gas Recirculation) is not a "diesel" thing. It's actually kinda new to them. Found in cars dating back to the 70/80's I guess. EGR's are part of the anti-smog deals - does pretty much just what it says - routes the...
  25. rgdillon

    A happy day in a miserable experience

    12 years old or not - if you can commit a brutal murder at that age - you can certainly take the punishment. Sorry to say the most they will get would be life. No jury is going to hand down a capital punishment for a crime commited by12/13 year old(s) at the time. Little over 30 years old and...

Members online

Total: 91 (members: 3, guests: 88)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top