Search results

  1. O

    Trany bucking part throttle uphill?

    Sigh, yes, I was just saying that to eliminate engine problems, I've heard it's common with older Ford trannies. Jesse
  2. O

    Trany bucking part throttle uphill?

    My dad's truck is doing the same thing, i.e., as mine. Guess I should have clarified. It's my 250 that is malfunctioning. Thanks, Jesse
  3. O

    Trany bucking part throttle uphill?

    Diesels have plug wires? New to this diesel thing... It isn't engaging, just bucking, rpm stays about the same. Jesse
  4. O

    Trany bucking part throttle uphill?

    My dad's truck is doing the same thing, F150 with 180k. At part throttle at the top of 3rd (maybe 4th too, can't remember), if engine speed starts slowing down the truck will start bucking. It stops if I motor on, let off the gas, or shift into a higher gear. Just flushed the tranny with...
  5. O

    Difference between 99 and 99.5?

    I was looking on Dieselsite.com and saw a conversion for a pre-Dec/98 to a 99.5 turbo. Mine was made in Sep 98, so how is it different from later models and how is this going to affect my aftermarket part selection/choices? Thanks, Jesse
  6. O

    Recommendations for 8" lift on 99 PSD

    How does that price compare to your Donahoe lift? I was told the steering was way too jerky with one stabilizer and two fixed it. I agree with the tires though, I want a d rated tire for sure and they are hard to find at 38" unless you step up the rim size = more expensive tires...yay, you...
  7. O

    Recommendations for 8" lift on 99 PSD

    I'm leaning towards the Skyjacker setup because it includes the braided vacuum and brake hoses as well as other parts that the Superlift doesn't seem to have. The most I tow will be about 7500, I definitely change my driving when I tow, and I can custom make my drop hitch. On...
  8. O

    Transmission Fluid Change

    Anyone?
  9. O

    Transmission Fluid Change

    By using the link above, it says Mercon V is recommended for my 1999 4r100 is this not the case? I hope not because I just flushed my tranny with Valvoline Mercon V and I've put almost 1000 miles on it...Now I'm scared to drive the truck! Jesse
  10. O

    Recommendations for 8" lift on 99 PSD

    I've seen a few kits out there for a SD PSD, but I would like some firsthand feedback from those who have been there, done that. What are y'alls recommendations for an 8" lift? Will I lose any of my towing/hauling ability, or is the suspension designed to take a heavy load like stock? Thanks...
  11. O

    AC switches to dash when in 4x4?

    What other things would you check? Jesse
  12. O

    AC switches to dash when in 4x4?

    TTT
  13. O

    AC switches to dash when in 4x4?

    Well, installed the braided lines with plenty of thread tape and still have the problem...help? Also, should my hubs say "lock" and "auto"? One says "free" and "lock", and one says nothing...they obviously have been replaced, but I am trying to figure out if they were replaced with the...
  14. O

    Nitrogen onboard air supply?

    I could just get the 4.5 hp motor and it will never ever see full load, I would think the amperage draw would be not even 1/4 of a full load draw. Agree? Jesse
  15. O

    Nitrogen onboard air supply?

    Think that winch motor would be enough to run the full-sized York? That would be a nice setup! Jesse
  16. O

    Nitrogen onboard air supply?

    What kind of psi will it pump? Is there anyone out there that makes a kit for the 7.3? That sounds like a good idea if it will maintain the high psi and put out a good psi. Jesse
  17. O

    Nitrogen onboard air supply?

    I was using that as a comparison between having to pay to refill the co2 and the refills getting costly (like n2o) and the compressor with a 10-15 gal tank would be cheaper in the long run for the same endstate (like a blower). I'm more into hi-po Mustangs, so it was an analogy I could...
  18. O

    Nitrogen onboard air supply?

    That is true, but I also looking at it from a refill standpoint. Compare it blower vs. nitrous...you can get the same amount of power, the n2o will be cheaper initally, but eventually with all of the refills, it's cheaper in the longrun to get the blower i.e. the compressor setup. Where did...
  19. O

    Nitrogen onboard air supply?

    I like the idea of that 12v compressor, but how do you think it will work in a 10-15 gal tank? That is an awesome price too. I also need to check around and find out how much of a strain is put on the charging system when the compressor is on. Thanks guys, Jesse
  20. O

    Nitrogen onboard air supply?

    I am looking into installing a nitrogen tank on my truck to run air tools, fill up tires, etc and I need some help brainstorming. I know I need a regulator to regulate it down, and all the guages, etc. The questions I have involve how a welding shop fills it up, how long it will last, and any...
  21. O

    +400 RWHP on a 7.3L?

    Where are you located?
  22. O

    +400 RWHP on a 7.3L?

    Were these numbers from the truck in your sig? Just the hybrids, open intake, and straight exhaust? 2wd or 4? I think I just got sold on a chip burner...
  23. O

    8" with 38's?

    Looking to get a Superlift 8" and some 38's on 16" or bigger Centerline Wildcats, but I need to know what backspacing/width rim I need. I heard if the backspacing is wrong it could lead to accelerated hub wear...no good, I need this to be done right the first time. Thanks in advance, Jesse
  24. O

    P0500 VSS code?

    So which gear oil, the light or heavy stuff...I'll go synthetic either way. Jesse
  25. O

    P0500 VSS code?

    So there's 3 different choices, which one do I use, and does it need a friction modifier for the posi? Jesse

Members online

No members online now.
Total: 188 (members: 2, guests: 186)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top