Search results

  1. O

    CCV Mod issues

    With the amount of blowby these engines have, no dirt is going back in...and the vacuum is a negative...no worries. Jesse
  2. O

    How to center steering wheel

    Hijack warning... Where is the rear spring bushing? The plastic sleeve between the leafs? Mine seems to be eaten through... Jesse Hijack complete...
  3. O

    7.3L getting poor gas milage

    For those of you that haven't done the in-tank mods....do them!!!! Mine fills up to the same spot, everytime, the first time. I can only milk in another 1/2 gallon once it clicks off. Jesse
  4. O

    Trans temp ok?

    I am from the test port, I hear that is the only accurate place to measure. Jesse
  5. O

    Trans temp ok?

    The ambient temp was 100 and the road temp had to be 10-15 above that. I was cruising dry at about 80 mph and my trans temp was ~178, that seem ok? I have a big Tru-Cool cooler and a new tc and am curious if I should look into a secondary cooler possibly with a fan. On the same drive later in...
  6. O

    Suspension differences between early and 99.5+ trucks?

    Dang typos...how the heck do you correct the title anywho... Back on topics...What are the differences between the early 99's and the 99.5+ trucks? I tried searching but my combination of words never got me anything, something about possibly pitman arms and track bars. I thought it was just...
  7. O

    Amsoil kit use oem spin-on?

    No biggy, I partially was wondering if the full-flow oem filter had the same thread pitch as the Amsoil full-flow. I also was curious about my oil change interval now that I have the system, as well as what my filter change interval should be. Thanks, Jesse
  8. O

    Amsoil kit use oem spin-on?

    How do you know when to change them? I can't seem to find my instructions...Is that what they recommend? Have you had your oil analyzed(sp) to see what your oil change interval should be? I use Rotella 15t, not the Amsoil stuff. Let me hijack my own thread here... I see in your sig you have...
  9. O

    Amsoil kit use oem spin-on?

    So it's the same thread? Jesse
  10. O

    Is the price right on 99 DRW 350 Bob?

    Thought so, plus the birdnest wiring and the way it was running. Thanks guys, Jesse
  11. O

    Is the price right on 99 DRW 350 Bob?

    Went by a dealer tonight and they want $16,900 for a 99 DRW CC 350 PSD stick with 178k on it. It has a roadarmor front bumper, 6" miter cut stacks, non-working (that I could see) air horns/compressor/tank setup, the rocker panels was self-applied rhino liner, cutout fender flares, what looked...
  12. O

    Amsoil kit use oem spin-on?

    I bought an Amsoil bypass kit and am curious if I use an oem spin-on for the full-flow or I have to buy hte Amsoil full-flow... Thanks, Jesse
  13. O

    Parking brake to the floor?

    Where is this pic, on the inside of each brake or the pedal housing under the dash? Jesse
  14. O

    Two problems...tranny and hub

    I have checked the u-joints by putting the truck in park and shaking the driveshaft in and out, back and forth checking it for play and found none. If there is another way to check, let me know. My buddy is going through Wyotech for diesel mech and he said it could be misfires because of bad...
  15. O

    Two problems...tranny and hub

    Could the shudder possibly be a misfire problem that I am only able to feel with the tc locked up? Jesse
  16. O

    Install new tc and vb....second gear probs?

    Umm...what if it's too late, should I reinstall or just give it time.. Jesse
  17. O

    Install new tc and vb....second gear probs?

    Well installed the Factorytech tc and accumulator and it seems to have a stumble in the top of second gear...(hard to count gears with lockup..) Under WOT in first boost will reach 27 psi then shift, second will reach 27 then drop down to 22ish and fumble around until it shifts into what I...
  18. O

    Coolant filter install question

    Down and dirty.... feed to the filter from the plug in the side of the water pump, return from the filter to the overflow? Jesse
  19. O

    Plug in water pump for coolant filter install...what size?

    What thread pitch and size fitting is needed to install the feed line to the coolant filter kit into the water pump? I am using a homemade setup and just need to get that fitting so I don't have to use a tee. Thanks, Jesse
  20. O

    Two problems...tranny and hub

    You may just be listening more intently than before. Everything goes back on the way it came off...unless you had extra parts left over then you probably put it back together correctly. I've thought about rebuilding the rear but I'm not quite sure where to find the kit to rebuild it. As for...
  21. O

    Two problems...tranny and hub

    Lift the truck, grab the left and right side of the wheel and shake it...if the rotor and wheel are shaking and the steering knuckle is moving...it's the bearing As for the tranny, it only seems to do it (or I only seem to feel it) on a steady throttle under a light load such as with the...
  22. O

    Two problems...tranny and hub

    Yeah, the hub was shot...but what about the tranny? Jesse
  23. O

    Two problems...tranny and hub

    No way it could have gotten in, it's a 4x4 completely sealed unit. Jesse
  24. O

    Two problems...tranny and hub

    First and priority: Just installed new tc and vb and did full fluid flush to find out if my part-throttle shudder was gone....NOPE! The pan magnet had what I thought to be too much "fuzz" on it...what else could be wrong in the tranny? Second: It's been 4 months and 4k miles and my new...
  25. O

    Mod days...

    Began installing my Factorytech accumulator and torque converter, Dieselsite tranny bypass filter kit, tru-cool cooler, 203* thermostat, new waterpump, coolant filter, and coolant flush....needless to say...none of those actually got completed. Fours in I got the tranny filter kit mounted...

Members online

No members online now.

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79
Top