Search results

  1. MidwestOffroad

    Can I flip my rear shackle/spring hangers?

    There are a few after market shackle drops from fabtech and VSS. but yes you can flip the stock ones with some additional modifications.. but the rivet removal suck..
  2. MidwestOffroad

    Bilstien help

    RED if you decide to add some lift i have a new set of the Bilstein 5100s for a 3-6 lift on the 99-04 trucks. I will let them go for less than the ebay ones. as far as install you can mount them any way you want. but they are usually installed per the stamped part number and logo on them...
  3. MidwestOffroad

    Trac Bar for Early 99' F250 Superduty

    Sorry I never seen that earlier post TBAR i may have been able to save you some grief The suspensions were changed on 3-30-99 so yes for suspensions the 99.5 starts 4-1-99 and for the rotors the cut off was 3-20-99 the engine stuff i forget the date. It is no easy feat to drill out the...
  4. MidwestOffroad

    Trac Bar for Early 99' F250 Superduty

    Anytime..
  5. MidwestOffroad

    Trac Bar for Early 99' F250 Superduty

    you wont find one for the early 99, you can make a late 99 adjustable one fit. but it takes some drilluing of the lower axle mount and replaceing the top stock track bar mount to a later style or drilling it as well. you can pick up a late track bar bracket for 10-15 bucks on ebay...
  6. MidwestOffroad

    TRIPLE PLAY MODS!! HORNS/EGR/GAUGES

    Looks great George, Are you going to leave the bezel black of plan on painting it. if you need anything else give me a shout. Jeremy
  7. MidwestOffroad

    Pro Comp spring issues.

    I had a broken spring and procomp had me order another set from 4wheel parts and when i shipped mine back I was creditied.. so i paid shipping 2 ways. (150 bucks)
  8. MidwestOffroad

    Pro Comp spring issues.

    good to hear , i think i had to pay shipping to return a set once under warranty.
  9. MidwestOffroad

    Suspension lift to clear 38"s

    Lift laws here are enforced so tired of the tickets and it was a v10. , unfortunately the millage is only 6 mpg better with my diesel.
  10. MidwestOffroad

    Minnesota REPRESENT!?!?

    the 12th of june Hot rod magazines power tour will be in rochester..
  11. MidwestOffroad

    Front sway bar diconnect?

    If you can life with the body roll then yes you can disconnect it. It will allow for more wheel travel. I never ran one on my last truck. Between swapping springs all the time and with a dual shock set up i never needed it.
  12. MidwestOffroad

    Suspension lift to clear 38"s

    Hey thanks, you may have seen my old truck as well on there. [/IMG]
  13. MidwestOffroad

    Suspension lift to clear 38"s

    then 6 and 37 will work fine.. i would stay with a 13.5 width ,
  14. MidwestOffroad

    Suspension lift to clear 38"s

    They have both the 4.5 HANGER KIT and the 4" spring lift. The 4" spring kit can sit taller than the hanger kit depending onnthe current condition of the springs. but i do know of a 4.5 hanger kit with 37" on 20s there tight and they rub slightly but will work. I prefer some room in the wheel...
  15. MidwestOffroad

    Suspension lift to clear 38"s

    Also if you need to bring it back to the states it will need to fit in a container. so your limited there. that picture looks bigger than 4.5 I am sure Ryan at SDHQoffroad.com or offroadwarehouse.com or Dave at Diablo Offroad.com or Jesse at farmboyfabrications.com will .
  16. MidwestOffroad

    Minnesota REPRESENT!?!?

    Just name the place and time..
  17. MidwestOffroad

    Suspension lift to clear 38"s

    Yes with 8" lifts it is recommended to run a x crossover steering system which replaces the pass side knuckle drag link and pitman arm, and relocates the drag link over the spring for less stress on the steering sector, which could break while driving down the road, If that was to happen the...
  18. MidwestOffroad

    EDGE EVOLUTION??? ANY GOOD?

    I have seen that happen to others , where on the higher settings the engine works with less effort and get better mileage.
  19. MidwestOffroad

    Trac Bar bushings

    no problem.
  20. MidwestOffroad

    Pro Comp spring issues.

    I would look into superlift springs. go on ebay and look up superlift and (scratch and dent) will have them 80-140 each depending on lift height and shipping was reasonable (75)
  21. MidwestOffroad

    EDGE EVOLUTION??? ANY GOOD?

    I had good luck with the mileage you can add a 2mpg easy.
  22. MidwestOffroad

    Trac Bar bushings

    SHOCKS http://www.superdutydiesel.com/forums/parts-sale/17625-bilstein-5100-shocks-4-6-lift-new.html Fabtech will be the cheapest route, they run about 170 the Icon bar is alum and runs 230
  23. MidwestOffroad

    Trac Bar bushings

    if your looking for shocks i put a set in the fer sale area. Bilstein 5100s for 4-6" of lift
  24. MidwestOffroad

    Pro Comp spring issues.

    You more than likely wont find replacement metal sleeved bushings like that are in the springs, but will have to add the poly bushings since the stock sleeved ones are almost impossible to replace. I know superlift,deaver and rubicon Express all have the bushings (poly) to replace them.
  25. MidwestOffroad

    EDGE EVOLUTION??? ANY GOOD?

    The Evo 2 is a good programmer. It does have its advantages over others since it does have built in gauges, Most programmers are set up with exhaust and air intakes in mind so need for a custom tuned chip if thats all you have, the edge has good programs but custome tuned are better. for...

Members online

Total: 101 (members: 2, guests: 99)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top