Search results

  1. MBRPCrazyford

    Project Performance Street Truck

    Looks awsome. I like the color choices. The red splits it up well. Keep the pics comin!!!!
  2. MBRPCrazyford

    MEDIC!!! 2000 electronic problem

    I always pull the keys out and disconnect BOTH batteries before messin with chips and computers.
  3. MBRPCrazyford

    Snow Removal Contractors...

    Malls and such are the places to get because they want plowed every inch or so and salted every.5" or so. Like you said, they are bad with delayed pay and such. At the price of fuel if you are runnin diesel equipment you can't compete with 25/hr. I don't know how much you charge per hr., but I...
  4. MBRPCrazyford

    TS 6position chip?

    powerstrokejunky, do you have injetors or not? If not, does your truck die in the 140hp setting as mentioned earlier in this post?
  5. MBRPCrazyford

    Snow Removal Contractors...

    same here. ONly 1 worth plowin.
  6. MBRPCrazyford

    Engine getting louder?

    Change that filter.
  7. MBRPCrazyford

    fuel mileage

    IS it possible that the guys that are seeng that mielage have a slipping tranny/clutch and wasted power and it's not to the point that they notice it yet? That just seems like quite a difference to me.
  8. MBRPCrazyford

    Pulse HPOP Installed!!!

    oh, not bad at all
  9. MBRPCrazyford

    Walmart closeout on 7.3L oil filters $3 each

    ARe the filters for the 99+ 7.3s the same as the OBS 7.3s?
  10. MBRPCrazyford

    How u like them apples? (pics)

    Very nice. Bet those things got some go.
  11. MBRPCrazyford

    check out these diesels

    WOW. That's awsome. Those trucks are next to unstoppable. Looks like one HELL of a ride. That's a whole lotta truck to be throwin around like that!! I need to get me one of those... yeah right..if only I had the money!!
  12. MBRPCrazyford

    will a stancor relay help my morning start?

    well, in 97 people weren't as concerned with diesels being dirty, but I know what you mean. And mine starts at about 40* or so with no help from the GPs
  13. MBRPCrazyford

    Pulse HPOP Installed!!!

    OK, that's what I was lookin for. Thanks. That looks like a real Beotch to get to.
  14. MBRPCrazyford

    Pulse HPOP Installed!!!

    what's it look like?
  15. MBRPCrazyford

    Pulse HPOP Installed!!!

    not to Hijack the thread, but where is the HPOP located?
  16. MBRPCrazyford

    fuel mileage

    wow, I don't know why the milage is so different between the two trucks
  17. MBRPCrazyford

    TS 6position chip?

    just bought mine over at amjperformance.com Don't have it yet as i just ordered it today,but the price was decent.
  18. MBRPCrazyford

    fuel mileage

    MIL, how hard are you on the pedal. Mine is stock for now (just ordered some goodies) -in sig] and I see about 18 MPG
  19. MBRPCrazyford

    New to the community!

    Welcome
  20. MBRPCrazyford

    Chip?

    I just bought me a TS 6 position. Don't have it yet, but will report back. I got the standard tunes which are 1. stock 2. high-idle 3. 50hp (tow) 4. 75hp (daily) 5. 125hp (race) and 6. 140hp (extreme). If you are lookin into a TS, go to AMJPERFORMANCE.COM. That's where I just bought that chip...
  21. MBRPCrazyford

    Starting with FUEL PRESSURE

    Those boost numbers are a little low for a 7.3. Stock they should make about 17 max. Sounds like your wastegate opens too early.
  22. MBRPCrazyford

    exhaust

    Well, I did it. Just bought the exhaust this afternoon. Should be here this week.;tu I also talked myself into a TS performance 6 pos. chip!!:sly Now I can lay some rubber. Next purchase might have to be new tires.:burnit I can't wait...it's like christmas all over again!!!!:tounge
  23. MBRPCrazyford

    How can I make it stop??

    Check the wiki
  24. MBRPCrazyford

    exhaust

    OK, that helped a lot. That was my deciding factor. Two people now have told me that it went in easy and sounded decent. I'm ordering it today or tomorrow. Thatnks for all the input guys!!
  25. MBRPCrazyford

    Turbo spool and downpipe size?

    That butterfly valve is an ok Idea, but do they make one for a 4+" exhaust? Shortbed, where'd you get the 4.5" DP? That's gotta be tight.

Members online

No members online now.
Total: 75 (members: 1, guests: 74)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top