Search results

  1. airdrew99

    Clunk noise in front end

    No more clunking at all!! The way the truck drives is awesome now. The truck feels tight now in the front end. I didn't realize how loose the truck felt. It is great that the clunking noise is completely gone!!!!
  2. airdrew99

    Clunk noise in front end

    Also, the passenger lower ball joint was shot big time! It had up/down play about 1/4". The driver side upper ball joint was shot also. I did change all 4 ball joints though.
  3. airdrew99

    Clunk noise in front end

    Well, I changed all four ball joints today. It was not bad at all. I think it took 7-8 hours total. It seems like when it is in 4WD and the hubs are locked, the truck jumps more than usual when the steering wheel is turned only one full turn to the left. Turning to the right seems normal with...
  4. airdrew99

    Buzz under dash help!!!!

    Noise is gone for now!?!
  5. airdrew99

    Buzz under dash help!!!!

    Nothing else is turned on. As soon as the interior light delay turns off (the dome light shuts off after 20 seconds or so), the buzzing noise occurs and the dome lights get very dim. With the key on, key off, or the truck running, none of this stops the buzzing noise. The only way to stop the...
  6. airdrew99

    Question Batteries draining!!!

    I charged both batteries all night and took my truck into Autozone. I isolated the batteries. My newer Interstate battery checked fine and my older battery checked bad. I also had the alternator checked. It checked fine (including the diodes).
  7. airdrew99

    Buzz under dash help!!!!

    The noise is back. It is coming from my interior lamp relay under the dash. P/N F57B-14B192-AA. The relay itself is buzzing. I can feel it, and as soon as I pull the relay out of the fuse box the noise stops. The noise doesn't occur unless all the doors are shut and the interior lamp thumbwheel...
  8. airdrew99

    Question Batteries draining!!!

    What is the best way to isolate the AIH? Is it the other relay beside the GPR? What tells it to turn on and off, normally? Thank you. Drew
  9. airdrew99

    Question Batteries draining!!!

    I got in my truck this morning and the batteries were completely dead. I just drove the truck yesterday (started and ran fine). I had to jump start it off my '68 Mustang. It took about 20 minutes before it would start. The truck ran about 45 minutes before I shut it off. I disconnected my older...
  10. airdrew99

    Clunk noise in front end

    Has anyone else used the Autozone kit? Did it work for you and do you know the part number?
  11. airdrew99

    Clunk noise in front end

    Does anyone know if the Autozone 4WD OEM/Ball joint/U-joint press kit is what will be needed to change my ball joints? I'm just wondering if I need a certain kit for doing this, or is this a universal 4wd press kit? Thank you. Drew
  12. airdrew99

    Question Yard help, please!!

    I think I'll go with some pre-emergent. I've heard some other people talk about it as well. The grass has not turned green yet, but all the weeds and clover type stuff is green.
  13. airdrew99

    Question Yard help, please!!

    Here are a few pics from last March.
  14. airdrew99

    Question Yard help, please!!

    I'm renting a house in Oxford, Miss right now. The grass is pretty ugly. There is a lot of clover and weeds in the yard. I'm wondering what I can do to make the grass look better. Some of the yard has no grass at all. I don't want to spend a lot of money, but I would be willing to spend some to...
  15. airdrew99

    Front brake problem

    I had my front rotors turned yesterday, and I put new pads up front. As I went back together with everything, I noticed that my passenger side floating pin (the one that goes into the caliper mount/bracket) was completely seized. The other one was able to be pulled out, cleaned, lube, and put...
  16. airdrew99

    Clunk noise in front end

    Well, I checked my ball joints yesterday. Both passenger side are loose/bad. One feels a little loose on the driver side. I will replace all 4 at once either on my spring break or this summer. Thanks for all the help from everyone. Drew
  17. airdrew99

    Question Brake pad advice, please!!

    Anyone using the Duralast Gold from Autozone? How are these?
  18. airdrew99

    Question Brake pad advice, please!!

    My 2000 F-250 PSD 4X4 needs new brake pads on the front. What kind of pads do you all recommend? I recently put a cheap set of front pads on my wife's '04 Accord. Her front rims stay covered in brake dust (the pads have been on there for 15,000 miles). I don't need super racing/heavy duty pads...
  19. airdrew99

    Clunk noise in front end

    Amazon.com: Moog K80026 Ball Joint: Automotive Amazon.com: Moog K8607T Lower Ball Joint: Automotive Here are 2 links for amazon.com. They have the two Moog ball joints I'm looking at. They seem to be the cheapest price for the Moog brand. Advance auto carries them also, but a little more...
  20. airdrew99

    Clunk noise in front end

    Hey guys, I haven't had time to check the ball joints or brakes yet, but I hope to next weekend. I do have a question. I understand that I should replace upper and lower ball joints at the same time. Do I need to replace both driver and passenger side if only one side is bad? I'm a full-time...
  21. airdrew99

    Clunk noise in front end

    Well, I pulled off the front shocks and they looked fine. They were definitely worn out, but the bushings were still intact. I replaced them and the ride quality is excellent!! I still have the clunk in the front end, so I will be checking the ball joints next chance I get.
  22. airdrew99

    Buzz under dash help!!!!

    twt, Is the switch part of the latch mechanism on the aft side of the door?
  23. airdrew99

    Clunk noise in front end

    I am thinking about removing my front shocks and driving around my neighbor hood to see if the clunking noise stops. What do you guys think of this?
  24. airdrew99

    Clunk noise in front end

    Smoky, Thanks for the heads up. I will definitely check that first. How much did those 4 Ranchos cost you? Where did you get them? By the way, I attend Ole Miss. I root for Miss State as long as they aren't playing Ole Miss. Drew
  25. airdrew99

    Clunk noise in front end

    DaveBen, When I jack up the truck like you described, do I need to jack it on the front rearend (so the suspension is still loaded) or the chassis? Also, where can I get the Moog Heavy Duty ball joints? Thanks for all your help on this forum. You've answered questions for me in the past also...

Members online

Total: 72 (members: 1, guests: 71)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top