Search results

  1. airdrew99

    Glowplug troubleshooting help?!

    Zookie, I just replaced one battery about two weeks ago with the 1000 cranking amp Interstate battey. The other battery came with the truck, but was manufactured on 10/2006. I will probably go down and have each battery load tested anyway. It seems to be cranking over fast enough to start...
  2. airdrew99

    Glowplug troubleshooting help?!

    I've read many of the posts on people having trouble with glow plugs, glow plug relays, and even HPOP's. I replaced the glow plugs on my truck less than a year ago. I used the Genuine Ford glow plugs. They seemed to help with starting some last winter. Here lately if it is 45* or colder, I...
  3. airdrew99

    Fuel filter housing leak?!

    I believe mine is the 2-piece style. I did find a tractor supply store that might have something that will work. I will let you know if that doesn't work out. Drew
  4. airdrew99

    Fuel filter housing leak?!

    Does anyone know where to get just the gasket for the cap on the fuel filter housing? I called all the local parts stores. The only way they sell the gasket is with the fuel filter and cap also ($18). I can't see spending $18 when I just need the gasket. I just changed the filter about...
  5. airdrew99

    Fuel filter housing leak?!

    I replaced my fuel filter on the top of the engine (7.3L) about 6 months ago. I just noticed a few days ago that the gasket is leaking. The new filter came with a new cap and gasket. The gasket/seal is a circle (obviously) but is a triangle shape (like if you cut the gasket and looked at the...
  6. airdrew99

    Manual hubs grease???

    Just trying out my signature and avatar.
  7. airdrew99

    Manual hubs grease???

    Does anyone know a common reason that the hubs get difficult to engage? Is there a chance that it is trying to rust?
  8. airdrew99

    Manual hubs grease???

    I have a 2000 PSD 4WD. I like to lock the manual hubs once every few weeks to keep them working. Today I went to lock one of them and it was pretty difficult to lock and unlock. I've seen on older trucks that the hub can be taken apart and greased. I plan on trying to take it apart, clean...
  9. airdrew99

    Manual locking hubs

    In response to Kirbco, does anyone know roughly the cost of some Warn manual hubs?
  10. airdrew99

    Manual locking hubs

    I have a 2000 PSD with manual transfer case and manual locking hubs. I have an uncle that owns powerstrokes also. He seems to think that if I engage the 4WD (on the transfer case), then the manual locking hubs have a feature that will automatically engage. He said they can also be manually...
  11. airdrew99

    Transmission doesn't lock in overdrive, HELP!!

    Tail gunner, I'm not sure what you are talking about with the autoenginuity (or whatever). I do get the tranny to lock out after about 5 minutes of driving. Is there an adjustment I can make to cure this or is this how Ford designed it to be? Thank you both for replying back so soon. Drew
  12. airdrew99

    Transmission doesn't lock in overdrive, HELP!!

    I forgot to mention: I installed a trans temp gauge on my truck last year. I usually read about 100-125*F just driving around town. I did see around 165*F this past summer while pulling my Mastercraft down the interstate, but it was only for a short time.
  13. airdrew99

    Transmission doesn't lock in overdrive, HELP!!

    I need some advice on this. I have a 2000 PSD with the automatic transmission and 4WD. I just recently changed the transmission fluid (including the filter and draining the torque converter). When the outside temperature is around 60*F or lower, the transmission will shift fine until I get to...
View older results

Members online

No members online now.
Total: 180 (members: 2, guests: 178)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top