Search results

  1. KansasDiesel

    The new Lady is home....

    What a deal!! Congrats.:burnit :thumbs
  2. KansasDiesel

    I hate oil leaks!!!

    Thanks for the offer Rick, I got-r-done. Started at 2pm got done at 6:30, I now have a gutted EBPV and got the actuator sealed up tight. :thumbs
  3. KansasDiesel

    HPOP ?

    I gots a question... Does the light rest after you turn the engine off and back on? I have some burns of twildman, and whenever I hit around 30psi the light came on, I read somewhere that the computer will throw the light with boost over 26psi. I never lost power just the light comes on...
  4. KansasDiesel

    Injector on WVO

    Recentlly I had to send a Stage 1 injector back to BDP for some work. I asked them to inspect it well, due to having around 18000 mile on WVO. The news was Great, said it still looked like new, and there wasn't any hard build-up of carbon on the tip. His words were "Whatever you are doing...
  5. KansasDiesel

    I hate oil leaks!!!

    Nice write-up, The bad thing is I just about did all that in July when my turbo died. Looks like I Still get to work on that beast this weekend. When is all going to end? :dunno
  6. KansasDiesel

    96 F350 Died on highway

    yep .0125 I think that is why Bean said send it to him. In close position I believe Bean said it should be between .002 and .004 I knew when I took the selonoid off that the gap was more then .004 I started with a .010 feeler gauge and ended with the .012 feeler gauge. I asked them what...
  7. KansasDiesel

    I hate oil leaks!!!

    It's oil, I had it cleaned up pretty good after my other problem, took it for a short drive to see how the ol' thing was running. Got back and popped the hood, oil on the turbo and in the valley. I had fixed the leaks when I did my turbo back in July. Mainly the lower turbo seals. and she stayed...
  8. KansasDiesel

    I hate oil leaks!!!

    Sorry if this has been discussed the Search button isn't working for me. Now that the truck is running it appears that I have sprung a leak behind the turbo, I suspect the actuator for the EBPV is leaking. Is there a rebuild kit for the actuator? or some way to plug it up and take it out...
  9. KansasDiesel

    96 F350 Died on highway

    IT's Over !! Waiting on the Highway 2 hours for a tow truck.:o Replacing the CPS $125:o Replacing the IDM $280:o 2 1/2 weeks of tearing the truck apart and troubleshooting:o Removing the injector for a rough idle:o Repairing the injector $130 w/ next day shipping both...
  10. KansasDiesel

    Max Boost of stock turbo???

    When my turbo got trashed a couple months ago, I was told that the Max the stock turbo would take was 25 psi. It would take more as I do know hitting 35 psi several times. but it won't take the abuse too long. Had not confirmed that figure with Garrett but I have my chip turned down so I don't...
  11. KansasDiesel

    96 F350 Died on highway

    I agree a Great place with Great people, and I could not have been more pleased with the help I have been given on this, It is better if some of the experienced people lived closer, but 82ford was a great helping hand :thanks Patience :roflmao well more frustration, and the stubbornness of...
  12. KansasDiesel

    96 F350 Died on highway

    I only have around 19000 miles on these injectors. They are Beans Stage 1's poppet clearence was .0125
  13. KansasDiesel

    96 F350 Died on highway

    Well I haven't been online for a couple days look what I missed. JOAT- I tried to look at the oil flow from injectors with my son cranking, I didn't want him to crank very long and didn't see much oil at all from any injectors. Was not sure where I was suppose to look either, Now I know, from...
  14. KansasDiesel

    96 F350 Died on highway

    I really want this thread to go away too..... If this fixes the problem, Great. This has been a great learning experience for me on the AE program and the starting proceedures ( what has to happen ) on the PSD.
  15. KansasDiesel

    96 F350 Died on highway

    I have HOPE ! Last night I pulled the one injector that Buzzed weak. Talked to Bean at Beans Diesel Performance, Asked about the weak injector and started to explain my No Start problem. He had me check a measurement and I was not within tolerance. Bean also said that this would prevent...
  16. KansasDiesel

    96 F350 Died on highway

    If the tach is moving the CPS is funtional, correct? So I should have oil pressure at this point, enough to control the injectors. Which should be 500psi, correct? I connect the computer with the AE program, tried cranking again with checking the pressure of the HPOP, got zero this time when...
  17. KansasDiesel

    96 F350 Died on highway

    I was hoping that it was the IDM but had been warned that it might be the PCM. I read a case on another forum, simular case, his was the IDM. I am not that fortunate. Got to head to town and find some cleaner...
  18. KansasDiesel

    96 F350 Died on highway

    where to go Yes as 82 Ford said IDM didn't work. Right now I have the PCM torn out of the truck the engine harness disconnected from every possible place and ringing wires. Cleaning grounds, etc.. Strange thing. The PCM has an oily like substance on the plug and outside of the box, and...
  19. KansasDiesel

    96 F350 Died on highway

    Part should be home when I get there, and that will be the only thing I am interested in doing tonight.... I do have the service manual on CD and have a Helms wiring manual, done traced just about all the wires I can at this point. All I figure it's either the IDM or the PCM :o I am...
  20. KansasDiesel

    96 F350 Died on highway

    :roflmao :roflmao waiting is the hardest thing to do.... I keep looking at the tracking and keep saying I could have driven there and back in this amount of time.....
  21. KansasDiesel

    96 F350 Died on highway

    Thanks Crumm I really appriciate the offer, but about an hour ago I bought an IDM off of ebay, should be here in 2-3 days. IF this isn't my problem then I will have a spare to help someone else, but I am pretty sure this will fix her. I might have a spare after this anyway, NO CORE :sweet I...
  22. KansasDiesel

    96 F350 Died on highway

    I have a nice Fluke DVOM and it didn't seam to be fast enough to catch a signal, even on peak hold. That's why we used the analog meter. I checked both banks, and have checked using the pulg ground and the truck ground. I just don't think they are getting the voltage. I am trying to find a...
  23. KansasDiesel

    trailer brakes wiring????

    If you have a factory installation, you should have the factory wiring for your brake controller. Mine is located below the ash tray by the carpet. The colors of the wiring does not match the wire colors of the controlled so if the wires are not marked, be carefull when hooking up the...
  24. KansasDiesel

    96 F350 Died on highway

    Fuel pressure is actually set at 45psi which stock for the 96 is usually 43psi. I have an electric fuel pump like yours installed and the original mechanical pump is removed. It has work well there for 1 1/2 years. When switched to Veggie that fuel pressure is 62 psi. These trucks will run with...
  25. KansasDiesel

    96 F350 Died on highway

    I think Luke is 2 hours away. If he chimes in I can contact him and see if he would meet me somewhere. He's a good kid I met him at a dyno days last summer.

Members online

Total: 87 (members: 3, guests: 84)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top