Search results

  1. kiarasue

    FPR shim?

    FPR I agree that some items could fail due to the high pressure. The more is better deal. Don't knock it till you try it. The difference between 75psi and 95psi is the same jump as the 53psi to 75 psi. There is a big difference in performance. I get better fuel mileage, throttle responce, turbo...
  2. kiarasue

    FPR shim?

    FPR A friend of mine owns a International dealership and his brother is the service mgr. I know they over build some componets for a trouble free life. I was a little doubtful about that claim but I have tested to a much higher rate with only better performance. I bought a Walbro GSL 392 that...
  3. kiarasue

    Waste Gate bypass?

    Waste gate Sorry I wasn't clearer on that, I sliped mine over a charge air clamp bolt.
  4. kiarasue

    FPR shim?

    FPR shim What do you mean by not live long? I've been close to 100psi for many miles with no problem. I am going to look into what Bosch has to say about there pump. Gillette's spring is a fast way to get pressure up. I checked mine today and got a big suprise. 35psi!!!! The floor of the cap...
  5. kiarasue

    Waste Gate bypass?

    Waste gate You don't have to plug the line up, just unplug it and be done.
  6. kiarasue

    FPR shim?

    FPR Navistar says the system is OK to run at 105psi. I have been much higher but 95psi gets the most performance. I don't get the fuel drop in mine with a 5psi pusher at the tank. The GSL 392 Walbro at half the price of the factory Bosch pump is a big improvment also. I have been running at...
  7. kiarasue

    zoodad?

    Zoo dad Take a look in my gallery at my Zoodad on steroids. When installed you will have a 4" intake right to the turbo.
  8. kiarasue

    Eletric fans for 7.3

    Fans Funny this thread came up. I just finnished my pusher aux. fan. I had to push my pride a side and use this Olds cutlass ciera diesel fan. The brackets line right up with vertical bars on the core support. Had to backwards wire to make a pusher out of it. It is a 14" fan with two speeds. #1...
  9. kiarasue

    DTC.... 0478/0470

    EBP? I haven'y had this problem yet but have read that you might just need to clean the soot out of the hole so the sensor can read again.
  10. kiarasue

    The Dreaded Chime

    chime You know I just resently ran accross a how to for disabling them. I want the head lights to remind me but the key in is a pain when your trying to consentrate.
  11. kiarasue

    Electric fan

    Fans I tried the pure electric fan idea a few years ago and at that time couldn't get that would keep her coolunder a hard pull. On this truck I just wanted to shore up the factory fan for heavy traffic and warm weather. Don't laugh but the fan I found in the shop is from an Old's V6 diesel...
  12. kiarasue

    Blow off valves

    If blow off valves don't work on diesels then what are the big valves that release boost on the Cummins trucks? I was at the drags a few weeks back and they open about the 60ft mark and can be heard to the finnish line.
  13. kiarasue

    Blow off valves

    Blow off I have the dual blow off system. It is a little slow but does do the job. SP diesel sells a intercepter harness plug that stops the pcm from ever reading over boost. Its about the same dollars as the dual valve like mine.
  14. kiarasue

    What is a CPS ?????

    CPS CPS stands for "crappy phake switch" keep a spare with you at all times!!
  15. kiarasue

    Dual HP pressure hoses?

    HPX Were on the same page here. I made my system up with two extra port's. I have a hard time seeing "spikes" in the system. I guess the only way to find out is make another long hose to mount the Gage on the cowl to watch. My high pressure systems on my big trucks were prone to spikes from...
  16. kiarasue

    Dual HP pressure hoses?

    HPX I understand what was said about the size, I just don't buy into the idea even exsisting in there design. They were stating that there hose size has a "acumulator" effect on the rail oil pressure. I don't know what there line size is but the term "acumulator" means an area to gather oil in...
  17. kiarasue

    High Pressure Oil Crossover Tube, Threads

    Fittings The ports in the head are -5 o-ring. The other end is up to you. I used -4an and -4 hose.
  18. kiarasue

    CCV

    Have you thought about the good ole CCV mod? You will have a cleaner engine bay and charge air cooler plus up to 15hp has been recorded because of the negetive crank case pressure. Check it out.
  19. kiarasue

    Dual HP pressure hoses?

    HPX I think I understand what your saying about a cross over of two lines in an X configuration. I read about all the vendors jargon about what theres will do and the engineered size of the line. The oil flow or GPM is something I could never find any info on. I just used -4 line because the...
  20. kiarasue

    Dual HP pressure hoses?

    HX hoses I was ready to order a HPX kit and thought about how I would use it in my test bench truck. I put straight fittings in the heads. Made up two hoses with straight on one end and 90's on the other. The 90's hook to the head and both lines end at the fuel filter housing into a 4 way with...
  21. kiarasue

    High Pressure Oil Crossover Tube, Threads

    HX Finally got off my butt and put my nitemare on. Took a few miles to get the air out. Sounds so much healthier. I used straight fittings in the heads, 90"s on the hose end at the head and straight ends at the cross. Oh, I forgot to say there are two hoses. At the 4way cross that mounts above...
  22. kiarasue

    no more mercon?

    No more Mercon I'm glad theres no more Mercon. Nothing is new, just reinvented. For people with big mods or people that pull big, Change to type-F, B&M has sold it for 40 years by the name of Quick shift. Never did a thing for my C6 but my 727 torqueflyte and TH400 i had were awesome. Its been...
  23. kiarasue

    Hey North West Guys...

    NW guys I'll have to check the wifes schedule. I'm realy not a wimp. So for now I'll have to say HELL YES!!!!!!!!
  24. kiarasue

    Beating a dead horse discussion about the huch mod. IDEA.

    fuel I havn't found mine to be lacking in fuel but I would like to know what the GPH needed to keep her running. I am about to start examining the X from the tank forward. I think the factory one will support stock injectors but the pressure heats these pumps up. I'm loking into a high...
  25. kiarasue

    02 excursion chip or box?

    Chip or box I just switched to a hard chip. Sorry I didn't do it sooner!! Check out e-bay for seller scotng. I got a 6 position TS brand new with warranty for $250. Its is so nice to change on the fly. Get's hot? flip down a hole. This 50hp program is as strong almost as my superchips 100hp...

Members online

Total: 86 (members: 3, guests: 83)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top