Search results

  1. rsjohnsn

    Banks or Edge?

    Ok after the 6 gun the tires will break lose at 7psi. If I keep doing this I am going to have to buy some tires and brakes! Oh yeah, this is on a dually so tires get expensive. Scott
  2. rsjohnsn

    Banks or Edge?

    I just tried it and stock with 10lb of boost mine starts smoking the tires as well. I am putting the Banks 6 gun back on shortly from where I had to remove it for the new turbo and Y pipe. As far as the question goes, I like the Banks for a couple of reasons. Now the Juice may do this as well...
  3. rsjohnsn

    Transmission Service ?'s

    What about front and rear diff as well as transfer case? Will I benefit from synthetic? Should I also look for synthetic to put in the tranny or is that even available? Thanks Scott
  4. rsjohnsn

    Transmission Service ?'s

    Good question! What about a bigger oil cooler? My tranny temps have me concerned because they use to run 165 and then after the new turbo and Y pipe yesterday they are now at 185. I know this isn't bad but I worry alot when things are different than before. Thanks Scott
  5. rsjohnsn

    Transmission Service ?'s

    I am planning on servicing my tranny this weekend and I would like to know if there is anything I need to do while I am at it. What filter and fluid is everybody using? Is there anything I can do or need to do while I have the pan off? I allready have the tranny temp so that is done. Is there...
  6. rsjohnsn

    ride-rite air bags arrive today

    Thanks for the info, what was the part number you ordered? I am looking at FIP-2330 for $219.95. I want to make sure they are good for about 5000lbs or close. Thanks Scott
  7. rsjohnsn

    Latest Recall

    Thanks Dave, I believe the code is P1323 and P0064 or P0069. This tech should have been a doctor with this jibberish writing. Anyway if those make sense then I would appreciate the meaning. Is there a site that I can go to for the codes or are you just that good :hail Thanks Scott
  8. rsjohnsn

    ride-rite air bags arrive today

    Where do you guys recommend buying these at? I need to get some but not sure of the best and cheapest place. Thanks Scott
  9. rsjohnsn

    Engine light on

    How dare they go home and have another life! -mad Ok I guess that would make a difference. When you take it back make sure they write the code down because I would like to know what happened. That is if you don't solve it first. Scott
  10. rsjohnsn

    Latest Recall

    Ok, I got my truck back with a REMANUFACTURED turbo and a new Y pipe. The truck runs better now and I gained 5lb more boost which puts me at 25-26psi. I am concerned about the remaned turbo but not sure if it will make a difference if I bring it up. Also, on the work order they have a bunch of...
  11. rsjohnsn

    off road diesel

    Just curious but how many people have been inspected for this and what area do you live in? I live in farm country and would never have to worry but I wouldn't reccomend it for interstate driving. Scott
  12. rsjohnsn

    Auxiliary Idle Control

    Not a problem, it isn't advertised. I have it setting on the shelf just incase someone needed one. Scott
  13. rsjohnsn

    High Pressure Oil Crossover Line

    Make sure you carry the plugs you remove and a wrench with you when you install it. I had one bust on my 7.3 as did a few other people. This may not be a problem anymore but better safe than sorry. Scott
  14. rsjohnsn

    Turbo Timer

    I am getting a new turbo tomorrow and I want to get a cool down timer for it. What do I need and where do I get it? Thanks Scott
  15. rsjohnsn

    Auxiliary Idle Control

    I have one for sale and it is a Ford Factory unit. It comes with the mounting bracket, owners manual and wiring. You pay shipping and I'll send it to you for $175. Thanks Scott
  16. rsjohnsn

    Engine light on

    What codes would be set for changing an alternator? Did you have the engine light on when you took it in If not then they may have unhooked something and forgot to reconnect it. I would check under the hood around the alternator and make sure everything is connected good. Who knows, it may save...
  17. rsjohnsn

    Latest Recall

    What has been upgraded about the turbo and how will I know if it is one? As far as the idleing goes, it is always with the AIC mod or no longer than 5 minutes hooking or unhooking the trailer. Thanks Scott
  18. rsjohnsn

    Latest Recall

    As far as I know, it is just for 6.0's. Scott
  19. rsjohnsn

    Auxiliary Idle Control

    Thanks Bushpilot, that was the one. I had to check it twice because it didn't look blown but it is. Bama, I have one I will sell you. Why do you need the complete AIC? Are you just wanting to idle up the truck or do you plan on using it for a camper? Scott
  20. rsjohnsn

    Auxiliary Idle Control

    Thanks, I did pop the fuses out to check but I didn't see anything blown unless I overlooked it. After so long your eyes tend to cross anyway so I will check again in reverse order. If anyone knows where the wire gets its power I would appreciate it. Thanks Scott
  21. rsjohnsn

    Auxiliary Idle Control

    Thanks Bush Pilot, I already have the system connected and it worked fine but I believe I shorted out the wire that has power. My problem is that I don't have power on this wire any more and I need to know where that wire gets its power. Is it fused and if so what fuse is it? Thanks Scott
  22. rsjohnsn

    Auxiliary Idle Control

    Hi all, I did the AIC mod on my truck where I installed a switch to idle the truck up to about 1100 rpm at idle. The mod has been working fine until the other day when I had it running for the AC and I was under the dash running some wires and pulled a wire off the switch. Now nothing works and...
  23. rsjohnsn

    Latest Recall

    Ok, I have been dealing with this for the past month and I have had it back to the dealer numorous times with no luck. I have had the program redone, EGR valve replaced and still the serious lag. I have also got a squeal from the turbo when the computer cycles the turbo (VGT) at idle. My dealer...
  24. rsjohnsn

    Rear Spring Question

    Hi all, I have a question about my rear springs on my 04 F-350 CC Long Bed Dually 4x4. I had a broken spring a while back and I replaced both sides. After the springs were replaced the truck set level with the front as it always has. The problem I have is that they are on the overloads when I...
  25. rsjohnsn

    No Power

    Ok, lets just start over! CB can you tell us what magazine you got your info from and can you post your dyno readings so that they can be seen. This will let everyone know that you are real and then they will be more than happy to help you out. You have to understand that when someone comes...

Members online

Total: 129 (members: 2, guests: 127)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top