Search results

  1. A

    02 just idles

    Where abouts in the steering column was the bad wire, his fuse 45 is blown? Will they normally blow that fuse when the pedal goes?
  2. A

    02 just idles

    RSG, did you find something else wrong?
  3. A

    02 just idles

    My buddy has an 02 and all it will do is idle, it won't pick up rpms at all and all the gauges are dead, whats wrong? Allen
  4. A

    stalling at idle ?

    Can you get the black one, whats wrong with the gray one?
  5. A

    stalling at idle ?

    I have even noticed a studder around 1000 rpm or so. What color is the current cps know, is it black?
  6. A

    stalling at idle ?

    My truck stalls occasionally or sometimes will just studder, it ussually does it in gear, anybody gt any ideas as to what is wrong? Thanks, Allen
  7. A

    Where to buy u-joint?

    I'm talking wheel joint and the neapco number is 3-0332 which looking in the catalog you gave the link for the yoke should measure 3" on the inside, which it does and on the u-joint at the outside of the snap ring groove it should be 3". I have gotten 2 neapco u-joints, 1 precision and I just...
  8. A

    Where to buy u-joint?

    Has anybody had trouble finding u-joints that fit correctly? I bought 3 for the wheel joint on my 96 dana 60 and all 3 the cross was too wide. What brand do you guys use? Allen
  9. A

    ball joint ?

    I missed that, I found a couple places I can get them local, napa say they make there own and I've heard there not very good.
  10. A

    ball joint ?

    I googled moog and it took me to federal mogul's site and I couldn't find retailers. Sounds good I'll get Moog.
  11. A

    ball joint ?

    As far as I can tell looking online advance has moog but not napa or autozone. Has anybody used ball joints made by spicer/raybestos? Where is a good place and what is a good brand of u-joints to get? Allen
  12. A

    ball joint ?

    Where is a good place to buy good quality ball joints?
  13. A

    ball joint ?

    I saw your right up, is there any difference between that truck and a 96? Is that tube receiver in the kit with the 3 tubes in it? Allen
  14. A

    ball joint ?

    Does it take something other then one of the ball joint press kits with the 3 receiver tubes to remove and install ball joints on a 96 dana 60? Thanks, Allen
  15. A

    lazy 6.0

    We got the banks working. I don't know what the other codes was.
  16. A

    lazy 6.0

    Will the led's flash all the time that there is a code or do you have to do something, truck running? The banks makes a difference, I'm not sure if it's 140hp, does yours smoke? I don't think the truck is right stock, it won't spin the tires on gravel. Will you get the full 140hp withou any...
  17. A

    lazy 6.0

    My buddy has an 04 it seems real lazy from 0-20 mph, he can't spin the tires on dirt. He had the codes read, i don't have the numbers but it came up with 2 and 1 had something to do with egr. It also has a banks 6 gun and it doesn't do anything, he says it seems to work best on level 2. How...
  18. A

    brake light ?

    Couldn't find any leaks, do you guys get new or rebuilt? Allen
  19. A

    brake light ?

    It's got about 8 but will drop to 3 when you push the pedal and release.
  20. A

    brake light ?

    parking brake light, I'll see if we have a vacuum gauge around. Where is a good place to get a vacuum pump are some better then others? Allen
  21. A

    brake light ?

    Fluid level is full and I can't find any leaks also bleed all four corners. If I pump the pedal a couple times the light will come on and the pedal will get hard and it will be hard stopping. Thanks, Allen
  22. A

    brake light ?

    The brake light on the dash comes on right after I push in the brake pedal and goes out soon after I release the brake pedal, what's the matter? Thanks, Allen
  23. A

    trouble

    He lets it warm up for 10 minutes or so and it still does it and it's probably above freezing on most of his starts.
  24. A

    trouble

    My buddy has an 04 and when its cold it won't go faster then 20mph and it smokes whites, whats the matter? Thanks, Allen
  25. A

    glow plug relay

    I was trying to check it that way after the truck was running but my digital multimeter was giving me some weird numbers like -5v on the out post. Where can you get good relays at are some better then others? Allen

Members online

No members online now.
Total: 182 (members: 2, guests: 180)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top