Search results

  1. 96P_Stroke4x4

    rear disc brakes and aluminum diff cover installed!

    the bolts are readily available from mcmaster 1 1/4" long 5/16"-18 threads
  2. 96P_Stroke4x4

    rear disc brakes and aluminum diff cover installed!

    I installed the rear disc brake conversion from blackbird's yesterday. the install went smoothly except fot the brake lines (fittings were a little different) and i haven't gotten around to hooking up the e-brake cables yet. my truck stops a whole lit better now. it is definately worth it to get...
  3. 96P_Stroke4x4

    Question about stacks

    i guess it would depend on if you're gonna leave the muffler in or not. mine is pretty loud but i'm not running a muffler. i would suspect that it will only be slightly louder than stock if you leave the muffler on and run stacks instead of the stock tailpipe
  4. 96P_Stroke4x4

    Dana 60 is in!!!

    i'll let you know about the badges. everything went well except for not having holes for the sway bar brackets in the frame and not clearing out the bolt holes in the yolk before installing it. other than that there was some play in the inner tie rod from the pitman arm where it connects to...
  5. 96P_Stroke4x4

    Dana 60 is in!!!

    i wasn't even thinking about it at the time. since i made the trip up there i think joe should deliver a set to me hehe but like i said before, the badges might all be coming off anyway.
  6. 96P_Stroke4x4

    Dana 60 is in!!!

    if i see them around i might pick up a set of emblems, but i'm not in any rush. one of these days i'm gonna repaint and maybe take all the emblems and moldings off completely. maybe if i see some for a few bucks i'll stick them on.
  7. 96P_Stroke4x4

    Dana 60 is in!!!

    i do have a tube of super glue sitting in my cup holder. think that would work? lol
  8. 96P_Stroke4x4

    Dana 60 is in!!!

    well, i got lucky and was able to pick up and install a dana 60 over the weekend. :D Thanks Rich! (94f450sd):thanks it came out of a '94 f-350 dually dump truck with a whopping 68,000 miles on it :sweet i got everything with it, sway bar, trac bar, and all the brackets. i installed f-350...
  9. 96P_Stroke4x4

    Lug Nuts

    yes, just use the factory lug nuts that you used with the steel wheels. i got a set of factory aluminum wheels with lug nuts from a friend, compared the lug nuts to the ones i had for the steel wheels and they were the same.
  10. 96P_Stroke4x4

    Has Anyone Added a Second Alternator?

    is that 1500 watts max or rms? i'm running a 1200 watt rms amp and 3 caps totaling 5 farads and my lights dim with the bass 1/2 way up and not at full volume. maybe my alternator is in a little worse shape than yours but i agree, it would be nice to have a second alt. but then i have the...
  11. 96P_Stroke4x4

    What a pain in the ---!

    loosen the two bolts that hold down the fuel pump, when everything else is disconnected from the pump, turn the motor over by hand until the fuel pump pushes up a little, then remove completely.
  12. 96P_Stroke4x4

    CAT extended life coolant and a proper change

    IIRC i picked up the extended life coolant at the international dearler for $14 or $15 a gallon. when i flushed mine, i removed the drivers side block plug and the plug at the bottom of the radiator, drained the coolant, ran water from a hose into the overflow bottle untill it came out clear...
  13. 96P_Stroke4x4

    head light bulbs

    the things i've noticed about silverstars is that they are brighter than normal bulbs, which is nice, and at least for me they tend to last about a year before the low beams burn out. there have been some deals on ebay for them too
View older results

Members online

No members online now.
Total: 59 (members: 0, guests: 59)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top