Search results

  1. hillbilly9978

    Hiccup?

    well using this part number F7TZ-12K073-B i coulndnt find any place to buy one and plowhand is saying they are only 25 bucks now does anyone know where to get one because i would like to change it out thanks
  2. hillbilly9978

    Hiccup?

    how hard is that cam sensor to change out because my truck has shut off 3 times when i come to a stop but not in a row it was spaced out a few weeks each time but it has always started right back up no problem at all ... thanks
  3. hillbilly9978

    woo-hoo!!!

    yea thats what happend with me i started with a programer and then had to do more but only made it to a diy intake so far next on my list is a mbrp exhaust with cat and mufler delete pipes and gauges my programmer is only on level 1 now so i wreck my tranny haha and hopefully i can get that...
  4. hillbilly9978

    guage on air filter box

    does that gauge need to be plugged in because when i did my diy intake i just took it out ... is that a problem
  5. hillbilly9978

    programmer back on

    i got my truck all fixed and got my edge back from edge and putit back on and its allworking fine soim happy again haha just waiting for money to be right to get a MBRP exhaust i cant wait!!!
  6. hillbilly9978

    DIY INTAKE

    yea just a 3 in 45 piece of pvc frome home depot and it has a 4 in outside diameter and it fits pretty good i think
  7. hillbilly9978

    is the stock tranny very strong

    hmm i can handle getting a shift kit soon but the TC is going to have to wait a while haha where can i get a shift kit from and what is involved in installing one
  8. hillbilly9978

    DIY INTAKE

    my filter is not touching that pad above the wheel well it is about an inch off of it wedged between the battery and the fuse box but not wedged super tight just barly and the fitting i used was from home depot just a 3" 45degree coupling but the outside diameter is 4" so it fits perfect at...
  9. hillbilly9978

    is the stock tranny very strong

    haha thats what i though where can i get a tranny cooler and about how much do they cost
  10. hillbilly9978

    is the stock tranny very strong

    how long will the stock tranny last with a chip and exhaust and what can be done to make it last long with out buying a new tranny
  11. hillbilly9978

    left head light points down

    this started about a year ago when i hit a truck and dented my front bumper and ever since the left light points slightly down where are the screws that adjust the left, right, up, down position of the head light thanks
  12. hillbilly9978

    DIY INTAKE

    also is there a way to clean this filter or when it gets dirty will i have to replace it... thanks
  13. hillbilly9978

    DIY INTAKE

    ok here are some pictures of the finished product i just took them and it was dark but you can still see what is there
  14. hillbilly9978

    DIY INTAKE

    well its all done and it seems to be sealed up pretty good i think i am going to get a 60 degree connector tomorrow and try that out the 45 is a little tight fit
  15. hillbilly9978

    DIY INTAKE

    so your telling me that all the pulling and screaming and anger that i had while i was out there was unnecessary haha cool well ill try that out and then get some pictures up i broke parts of that air box off trying to get it out already but after i get the napa filter in there i wont have a...
  16. hillbilly9978

    DIY INTAKE

    well im working on putting the napa filter on right now it was 50 bucks here in vegas and i got a 45 degree pipe and had to squeeze that rubber hose onto that and then figure a way to get the filter on that 45 piece its fighting with me now haha but im not going to give up is there any tricks...
  17. hillbilly9978

    block heater??

    it doesnt get that cold but i will still plug it in just so i wont have to warm my truck up as long in the morning before work the past week its been getting down below freezing at night its 52 right now and the low is going to be around 35 so not to cold haha
  18. hillbilly9978

    problem solved

    thats what i was thinking to... but its fixed now
  19. hillbilly9978

    DIY INTAKE

    bear.. did you notice any performance increase at all with that setup and where did you get the filter to put in there thanks
  20. hillbilly9978

    block heater??

    ok i found it it was tucked under the battery on the drivers side so i cut the zip tie off and pulled through the grill so i can plug it in at night now thanks
  21. hillbilly9978

    block heater??

    haha damn ill just paint my truck then and it should have one haha well my truck was sold in vegas so idk if it has one it tells you how to use it in my manual but it dont say where it is so ill look by the oil filter and under the bumper and see what i come up with
  22. hillbilly9978

    block heater??

    where is the plug located on my model truck 97 f250 psd 7.3L color red if that would help also haha j/k
  23. hillbilly9978

    problem solved

    the expensive way by taking my truck to ford i gave up on trying to fix that clicking and what ended up being the problem was the edge evolution lost contact with my pcm while it was programming and ended up just erasing my pcm so my gpr would click because it didnt know what else to do haha...
  24. hillbilly9978

    DIY INTAKE

    whoops i meant to say 45 degree connector well i can get those to and just cut it to length haha thanks
  25. hillbilly9978

    DIY INTAKE

    ok so i can just go to napa and get that filter right? and then all i would need is a 4" 90 piece to connect to the old rubber hose and clamp it down? because i can get a 4" 90 from work since i am a electrician ill just get a 4" EMT conduit 90 degree piece its made out of aluminum will...

Members online

No members online now.
Total: 38 (members: 1, guests: 37)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top