Search results

  1. roger2003

    The Truck Is Mine!!

    It's a long road but worth it:clap: ;tu
  2. roger2003

    Question Ford,Chevy,Dodge Tranny opinions....

    I think I speak for many of the guys when I agree with you that Dodges are kinda weenieish:lmao :doh: ;tu
  3. roger2003

    Oil dipstick cracking

    My opinion is heat and poor design. I think that most of us reach up and pull toward yourself and up when removing the dipstick. The dealer broke mine earlier in the trucks life, luckily I was watching and brought it to the managers attention right away.
  4. roger2003

    The Truck Is Mine!!

    I paided mine off last month, what a great feeling.
  5. roger2003

    Air Filters

    I don't have alot of experience with Airaid, but if you have to clean it every month that doesn't sound to cool unless you enjoy that. I am looking to go with Volant cold air intakes. I've heard that filtration and air delivery are high. That would be my choice.
  6. roger2003

    Brake light in dash comes on

    Do you have anti-lock brakes and I assume that you have drums on the back? I have heard of this problem with a anti-lock brakes, it's a bad sensor plug connection on the back axle.
  7. roger2003

    Bumper, winch and lights installed

    Damn, the bumper looks sweet. Way to go finishing the install off.
  8. roger2003

    OFF ROAD lights.

    They have an unlimited number of bolt on bars or mounting hardware to do a sweet job of attaching to the different surfaces of the truck. Check out KC lites or highlighter.
  9. roger2003

    Need a advice and opinions for F350 or F450

    I hope I was able to help, I 'm a fan of the 350, my self but than it's been said "I ain't quite right!":tounge :lmao :innocent
  10. roger2003

    Steering Stabilizer

    I don't think that a stabilizer is your problem, it sound like a ball joint or possibly a tierod problem. It's possible and it's not going to hurt to try if everything checks out. They are cheap enough not to hurt to bad.
  11. roger2003

    I'm Here! waited and found the right one!

    Nice truck, congrats on joining the forum, just be careful, it's easy to start rifling money hand over fist into them. Make a goal list, check your money, and just work on it slowly. P.S. keep money on the side to keep her running:lmao ;tu
  12. roger2003

    Need a advice and opinions for F350 or F450

    Hey Roscoe, I can't imagine needing any more than a one ton to pull a trailer unless your cross country or going to load it down hard. A one ton will have parts more availible than a 450 would. Mpg's can't be much different, capacity is more on 450, ride goes to one ton, and durability is a...
  13. roger2003

    Leveling Kit Question

    I am not a big fan of this subject but I felt I needed to say something. I hear bits and pieces of talk about mpg's, and it's a dumb topic to bring up. With 6" of lift and 35" Toyo's I am still getting 18 to 22 mpg and I don't drive nice. There are to many variables availible to hang a set...
  14. roger2003

    Steering Wheel Cover Needed

    ????? I'm scraching my head, I found a mossy oak steering wheel cover at Advanced Auto with the nubby grips off the rack that fit right on my wheel. Unless there is something I didn't figure out, it fits.:dizzy:confused:
  15. roger2003

    What are safe running temps? (egt)

    I was under the impression that the lower the egt the better, but I don't think it wise to run any higher than 1450. Things would start to melt down at those temps.
  16. roger2003

    Interior Dash Mods (gauges, switches, etc)

    Bama those are sweet switches. I'm going to find a reason to install some!!!!
  17. roger2003

    adding Reverse Sensors

    I have them on my truck stock, I hope you have some time on your hands and a flare for the impossible. It should have wires run, just need to cut holes in back bumper, run wires to dash switch that you have to buy. Is it worth it? Thats for you to answer.
  18. roger2003

    Question What did you do to your truck today?

    Today I tackled the Amsoil oil change, new oil filter, new fuel filters ( I didn't change the hard one/ wasn't in the mood/), replaced a blown line on my FS 2500 micron filter ( that popped about 8 monthes ago- just had it capped off), found a vacuum line that had fallen off, diff lube front and...
  19. roger2003

    CB Mounting

    I have the Cobra 29 Dale Jr model and I mounted it on the floor in front of my middle council under the change holder, I mean ashtray. It workes out well for talking while you drive.
  20. roger2003

    Alien patrol bumper installed

    Yaa, at least you blocked the cursed emblem but you can still see the truck:dizzy:dh
  21. roger2003

    What kind should I ask for and were do I go?

    Trisha, I have to agree with jestersv, you never know when the shoe " ha ha" will drop. I have had pads stick rotors heat up and warp. I have stuck dealership equipment back on her, but just because thats what was availible at the time. I'm always looking to upgrade. Just depends on your budget...
  22. roger2003

    Question What did you do to your truck today?

    The good news is that your truck runs better and that your three in a row is over, " if you believe in that stuff " :dizzy:stir:stir the bad news is that now you have to fix the truck and pay a ticket:soap:violin:cop:cop
  23. roger2003

    Alien patrol bumper installed

    The bumper looks sweet. I would say that nobodys going to cut you off. I can't help but notice the presents of a dodge product on the superduty forum in the latest post. Maybe someone should have zoomed in on the bumper a little more. yuc!!!
  24. roger2003

    Help Needed Looking for info on backseats

    I was sure that some of the '05's and later had that as an option or maybe I'm wrong. I seem to remember looking at a newer truck and thinking that that backseat option is for me. The dealer is no help, they don't have descriptions on their order numbers so there is no way to search unless you...
  25. roger2003

    Help Needed Looking for info on backseats

    No, I want a full backseat. I have a real four door Crew cab with a full backseat but it doesn't fold down to expose a flat metal surface or have the seat cushion fold over to protect the beautiful leather. I am looking at replacing the backseat to haul tools that I can't leave in the bed of my...

Members online

No members online now.
Total: 97 (members: 0, guests: 97)

Forum statistics

Threads
30,566
Messages
266,219
Members
14,691
Latest member
cityworldford

Latest posts

Top