Search results

  1. O

    powersteering pump seems to be pukin'

    couple questions for all you all knowin' desiel gurus. Fisrt I'm wondering if there is a seal kit for our P/S pumps? mine seems to be puking fluid from behind the pulley.Next how much oily air should be coming out of the ccv and is this a good indicator of over all engine health?
  2. O

    normal coolant temp range?

    well... blew second waterpump (new not reman) in less than a year fri. coming home from work. Decide to put a temp guage & oil press. guage in and wow it seems to hang in around 200- 205 degree's under throttle and run about 180 idling. fan has no wobble but is very stiff to turn ...
  3. O

    question about regulated return mod

    does this mod completely bypass the stock fpr or if I want to run a fuel pressure guage to my cab do I need a completely separate regulater to boost incoming pressure? I know this is probly a dumb question but I'm confused as to wether this mod boosts incoming . or just evens out the pressure...
  4. O

    something real strange happened on the way home tonite!!

    I was going along on the highway at about 70 ,egt's about 700, and all the sudden the truck felt like it was pulling a 20,000 trailer for about 5 seconds then it would feel like it had all the power in the world. did this to me about 5 or 6 times. Idrive about 80 round trip a day to work...
  5. O

    found 94 in junkyard

    got a van here in a local yard if some one is looking for parst or a core for anything motor is complete. the yard is cheap , paid 30 bucks for 2 piece drive shaft yesertday. I can go get the parts and ship them ( gives me an excuse to go crawl and get greasey:D )
  6. O

    truck wants to be difficult in the morning

    It started doing this on really cold mornings then stoped when it warmed up this spring now it's happening again . When I first go out to start it in the morning the engine wants to lope really bad till i push the go pedel and tach it up for a few seconds . I'm thinking glow plugs ,I'vee tested...
  7. O

    tranny temp sender install?

    where is the best location to put the sending unit to get a good working temp? I just had a new tranny put inand the shop did not reinstall the sender:thanks
  8. O

    need some advice in a bad way!!!

    Hey there everybody, I just finished puttin' in a new torque converter ,deep pan,and sonnex/ tricumulator .it's been a long weekend . put 4 quarts in T/c before install let it warm up good ,then topoff fluid . Now I have no go in any gear with a flashing OD light . My wife is chewing on my...
  9. O

    new here, gotta few questions you diesel gurus

    I've been lurking around reading as much as I could.ya'll seem to really know your stuff:hail I just finished the ccv & IAH mods . Got some questions about shimming FPR I'm have trouble finding the right fitting to connect to the regulator, any ideas? Also inthe the morning when I start up that...

Members online

No members online now.
Total: 59 (members: 1, guests: 58)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top