Search results

  1. D

    Abs pita

    Guys.. I work in northern alberta. We run a fleet of strictly superdutys, and we are running into one big problem. We are constantly having trouble with the abs systems in these trucks, specifically wiring. All of the gravel we run on chews up sensors and wiring like nobodys bussiness. Has...
  2. D

    Passing up on Ford b/c of body removal???

    If ford took design cues from some very good diesel designs they would'nt have built another v-8. As far as I am concerned a v-8 diesel is a boat anchor. Nothing has bottom end grunt and torque like an inline six. My 2 cents, but I do not like the v-8 design. I bought a diesel for low end...
  3. D

    smell of burning rubber?

    Had the same trouble, I mis-diagnosed the smell. It was a leaky axle seal dumping gear oil onto my brakes. Brake discs got hot, oil burned and stunk like burning rubber. Worth a try.
  4. D

    PSD with the easy life

    I have to give you credit for having a truck with that kind of mileage on it. We have never had a truck last much longer than 250,000kms. It seems that after that these trucks literally seem to fall apart. We run into injector troubles, broken leaf springs, transmissions and transfer cases...
  5. D

    PSD with the easy life

    I have got to disagree. We run a fleet of 10-15 fords, and it does not matter. We are in northern alberta, so we see everything from -40c to +30c. Some of the trucks are excellent, some are turds. It all comes down to who is driving and caring for the truck, as well as the truck itself. We have...
  6. D

    Question Brake spongey

    I am onside with the caliper pins, we have a ton of trouble with them. The pins are out in the open, and it seems that as soon as the truck spends some time on gravel the seals get trashed and the pins seize. Easy fix, you can buy the pin and seal kit direct from ford. On my trucks i have used...
  7. D

    holy smokes !!!

    One missing... White smoke--- Coolant entering the combustion chamber, somewhat common on head gasket and head failures. Black smoke, as mentioned, is fuel that is not burning completely. Some think it looks cool, to me it is a waste of money. Blue usually indicates oil burning, but i...
  8. D

    U-bolts

    Its one of those things, it will be fixed right until the next piece breaks.
  9. D

    U-bolts

    Thanks fellas, i just ordered a set of 3/4 inch, will be here in the morning.
  10. D

    Rear brake line damage

    No messing around, truck isnt making money sitting in the shop.
  11. D

    U-bolts

    Just in the process of reinstalling a rear diff housing in a 2005 350 Drw. I had to have new u bolts made up, as the originals were seized up. The u bolts i had made are 1/2 material instead of 5/8 material. Will this be strong enough, or should i order a new set? I cant use ford u-bolts because...
  12. D

    Rear brake line damage

    Thanks fellas, appreciate it. Tool bought and repair done.
  13. D

    Rear brake line damage

    Guys, i am in the process of r+ring a rear diff, and i twisted the end off of the brake line that runs from the master cylinder all the way back to the crossmember above the rear diff. Is it possible to splice this in any way? The dealership wants 588 bucks for this line. Any ideas?
  14. D

    Hole in rear Diff.

    No oil at all, one of the dumb-dumbs that works for us didnt notice that he had hit the rock, made 50+ clicks before he noticed the noise. We are looking for a used one right now.
  15. D

    Hole in rear Diff.

    Pictures are here.
  16. D

    Hole in rear Diff.

    I have an update.. The hole is in the housing itself, not the cover. I was just unloaing it off of my lowboy and she locked up tight. Tore the cover off in the shop and this thing is cabbaged. There is going to be no saving it. A chunck of the housing got picked up in the gear set and made a...
  17. D

    Hole in rear Diff.

    Hey guys, i have a 2005 f-350 Drw that is down right now. The truck took a rock in the front of the diff casing and there is a hole about the size of a golfball in the case. Is this something that can be welded? Or will Axle housing need to be replaced? Thank you very much in advance. Also, does...
  18. D

    Question Something still running after turning off engine.

    If i remember correctly that sound is the injector solenoids activating. Had something to do with bleeding fuel down in the rail to eliminate overfueling at startup. It had something to do with the stink of unburnt diesel at startup. We have lots of trucks here that had this done and have ticked...
  19. D

    Thermostat Replacement

    I have an 07 f-550 with the 6.0l in it that wont hold engine heat on its own. I am going to try changing the thermostat. My question is do these 6.0ls run one or two thermostats? Most v-type diesels that i have worked on have twin thermostats, but for the life of me i cant find a second one. Is...
  20. D

    New Again

    Were you able to get it with the 6.7l???
  21. D

    6.0 litre High idle

    sure do
  22. D

    6.0 litre High idle

    Does anybody know if there is a way to manually high idle an 06 350 with an auto? I need a way to idle my truck up before we hit -40 again. Any help is greatly appreciated.
  23. D

    No start

    I would put my money on the quick disconnect oil fitting. We have had a few pull the same issue. It leaks when the oil is hot and thin, but smartens up once the oil is cooled down and thick again. My 550 did the same thing in a drive thru. Try pushing that heavy lug out of the way.
  24. D

    Question 6 liter cold run issues.

    Hey all, I have an 06 f-350 with the 6.0 litre and automatic. I am having issues with the truck at low temps. The engine runs great warm, but even after sitting in my driveway for 20 minutes idling in the morning, the truck will not shift out of second gear. It doesnt matter how light i am on...

Members online

No members online now.
Total: 24 (members: 0, guests: 24)

Forum statistics

Threads
30,517
Messages
266,070
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top