Search results

  1. F350CCFX4

    Cluster dual pod ? 15003 autometer

    Anyone tried this cluster bezel? Just wondering how it looks and how much it blocks? Any further information would be greatly appreciated.
  2. F350CCFX4

    Mechanical oil pressure ?

    Not a fan of putting 70psi in the cab of my truck, but is there an isolater that can be purchased so that the gauge reads correctly, but the oil doesnt need to reach it? There isn't a setup that I know of, but its been several years since I have looked at this option.
  3. F350CCFX4

    FICM Half Shell

    -------------------------------------------------------------------------------- How many on here have replaced just the half shell if you have the 4 bolts? I ended up doing that yesterday and the truck is so much nicer to drive. Quiet, Smooth, Non aggrivating and just much easier to...
  4. F350CCFX4

    Headlight knob replacement

    Anyone know of an aftermarket metal knob being available? Just snapped my second knob and it broke the same place on the clip that holds it on. Seems when it gets down below 0 you are not supposed to pull the knob out to turn your fog lamps on. I dont want to replace it with another plastic...
  5. F350CCFX4

    Heater Cord Part number

    Need to get CASE's part number. Local dealerships cant find the number without having the tractor it goes on or actual part number. KAT's number is 28216, but they can't reference that number. Your help would be greatly appreciated.
  6. F350CCFX4

    Backing Plate (Dust Shield) some call it

    So, went to replace the back rotors and low and behold the backing plate issue had arrived at my truck. Replaced the rotors and checked the E brake pads and all seemed ok. Put it back together and just drove around the section. (4 miles) Got back to check on the rear brakes and one rotor...
  7. F350CCFX4

    Which Bilstein shock

    04 stock height, but reading guys are using the 5100, but not saying if they have a lift. Bilstein shows those shocks for 4-6" lift. Would they work or do they work for stock height or go with the 18 and 19 recommended? I do a lot of hauling with gooseneck. 20-24,000 lbs from MN to CO...
  8. F350CCFX4

    Idler Pulley(s)

    Looking for info on the 6.0 pulley and the 7.3 pulley. Diameter, Grooves if any how many?, Bore size and any part numbers that may be available.
  9. F350CCFX4

    Any IL, OH, IN, MO people have a 3.8L SC?

    Need to get my SC back up and going the city is tired of it sitting in the driveway. Need to get a replacement engine for it. Has to be able to move under it's own power. 89 Ford Thunderbird Supercoupe. If anyone has a used or possible rebuilt 3.8L SC for sale or know where one can be...
  10. F350CCFX4

    Clean Burn

    Anyone use one or more of these to heat thier shop/office? Looking at some benefit to the 800 gallons of oil we get when changing out the locomotives oil. That and getting used motor oil from farmers in the area. Need to find one that will do the AC also. Just in the infancy stage with...
  11. F350CCFX4

    Interior Paint 04

    So, got my gauges installed and Ford couldn't come up with my interior paint, so looking for it, but can't find it on their website. Any ideas where to look for it? I am only going to get Ford paint, because matching the interior is #1 priority. Ford said they could get it, but it would be...
  12. F350CCFX4

    Pathfinder tire Anyone used it?

    Found this tire and was looking for more information on it. Generally I go with Goodyear Workhorse, but for $40/tire I could use the $160 savings. http://www.discounttire.com/dtcs/findTireDetail.do?rcz=55318&rc=MNMINT&mk=FORD&yr=2004&sw=false&cs=265&dVeh=dVeh&pc=15758&rd=16&vid=008376&ar=75
  13. F350CCFX4

    Exhaust upgrade, Cat ?

    Why pay for the cat delete pipe when you can just hollow out the cat you get with the kit?
  14. F350CCFX4

    What Mags do you all subscribe too for Diesels?

    Just picked up a copy of PowerDiesel from local store, but and it has some good info, but my learing curve on the diesels is very big right now. www.dieselpowermag.com is their website. What do you others read and use for your trucks?
  15. F350CCFX4

    Grills

    Ok, so I own an all white 04 CC FX4. Not that the FX4 matters, but it does have a red stick on the back I was thinking of complimenting. Anyhow, been looking at grills and to be honest nothing seems worth the $ and time to change the factory one out. :p So, guess I am asking you all to...
  16. F350CCFX4

    Rear Window Replacement. Auto sliding installed

    Anyone does this conversion? Looked at WIKI, but didn't see anything on it. Have an 04 that I want to do the conversion on. Looks like everything from the window to the wiring can be bought for around $350, but instructions are up in the air. It will be tackled no matter what, but if anyone...
  17. F350CCFX4

    Edge and Attitude

    So, going with the SCT2 programs, but looking at gauges and not very happy with what is out there for the price. The products out there for $300 are IMO a joke. Anyhow, can you get the attitude to work by itself? Or can you plug the Edge in and not have it do anything but still use the tunes...
  18. F350CCFX4

    Custom Exhaust

    Been doing some pricing and coming up with having the exhaust I want delivered to my house or business for around $500-$550. This is for 3.5" stainless. This led me to going out and finding the pricing on 3.5" stainless and getting it bent and also what elbows are available. Keep in mind I...
  19. F350CCFX4

    Age old questions about gauges and pods

    Trying to bring myself around to spending $200 to $300 on gauges and just can't do it, but that's beside the point. More importantly need to figure out where to put them. The pillar mount has a ton of pics and is easy to see how it is all done, but I have the Vent Visors on my pillars and...
  20. F350CCFX4

    MN here

    Own a 2004 F350 and put about 45k on it within the first year, but this past one only put about 5k on it. Really like the truck very thankful for the heated leather seats up here. Has a gooseneck and it get's used as a truck. Normally, I work on thunderbirds and currently own 5 of...

Members online

Total: 87 (members: 1, guests: 86)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,627
Latest member
castellscl

Latest posts

Top