Search results

  1. T

    What's the biggest tire you've run on stock height?

    I want a tire to fill up my wheel wells as much as possible on a 17" rim. How big of a tire can I use? No lift. Just leveled.:thanks
  2. T

    ANYONE RUNNING 17" W/T COMBO ON 99-02??

    I'm wanting new wheels and tires, but I don't want any lift. I've got two good leads on new 16" and 17" wheels, but I have no clue as to what will fit. Right now I have 16.5 rims and 33 x 12.5 x 16.5 Mud tires with NO rub at all. What will fit ole masters of the wrench??????:hail
  3. T

    Intermittent Hesitation

    Mine was a little more pronounced but it was the Injector Control Pressure Regulator.......covered under warranty...... Mine eventually died and wouldn't start back from the problem. Some other possibilities are a loose ground wire, ICP sensor, and others have mentioned the throttle...
  4. T

    Help with Tires/Wheels Please......

    Guys when I bought my 02 F350 CC LB, the truck had 16.5" wheels/tires on it. As you know 16.5" is an odd size to find anything for. I put a new set of tires on about 15K miles ago and they are WAYYY to agressive. I want to make some changes but did not know if a 16" wheel will fit (was it...
  5. T

    WHO'S GOT THE MOST MILES?

    Just clocked 90K+ on my 2002.
  6. T

    More Symptoms to an OLD problem......

    $106 Later and (1) ICP Regulator Fuller Ford in Cincinnati, OH took care of my truck. Replaced the ICP Regulator and truck is good to go again! $106 to repair and a $200 tow bill.........I'm not complaining. A big :thanks to all who tried to diagnose. Hopefully this thread will be...
  7. T

    More Symptoms to an OLD problem......

    Last code thrown was p1212........at death!! Stealership is supposed to let me know tomorrow......they called today and said they had checked the obvious and that it wasn't any of those. I told them I had put (2) CP Sensors, (1) ICP, and (1) Fuel pump on and they said "Didn't you know this...
  8. T

    More Symptoms to an OLD problem......

    Another symptom before DEATH....... Truck would stumble and stall worse on an uphill angle. I tried to pull into a fairly steep driveway and the truck died and would not start until I rolled back into level territory. THEN......backed into lumber company to load up and it DIED to never...
  9. T

    More Symptoms to an OLD problem......

    Powerboatr..... I found the ground I think...... Right next to the power distribution "mess" under the hood on the driver's side mounted into the left front qtr panel. 3 grounds.......(2) Black/yellow, (1) Larger red/yellow. I removed it and re-installed........I'll let you know after...
  10. T

    More Symptoms to an OLD problem......

    Code 0603 showed this morning.......I think that has something to do with the ICM???? I'll try the ground bolt under the dash now....... I'm open for anything.
  11. T

    More Symptoms to an OLD problem......

    -mad OK......Last try. Truck started dying when trying to accelerate from a stop. It seemed as if the truck was rolling it was ok, but from a dead stop it was Russian roulette whether it was going to stall or go. Most of the time truck would start up and go on, but sometimes it...
  12. T

    Please Help.....Truck Stalling at stops.

    It has returned............it was fine for about 2 days............. Did it twice Friday, twice Saturday, once Sunday............-mad -mad
  13. T

    Please Help.....Truck Stalling at stops.

    ANY help!!!!???????
  14. T

    Please Help.....Truck Stalling at stops.

    bump
  15. T

    Please Help.....Truck Stalling at stops.

    Yes, the new model takes an 1 1/8" socket (I think) to install/remove. The old one came out with a 5/8" wrench under the head of the unit. Amazing how such a small thing can make such a BIG difference.
  16. T

    To muffle or not to muffle, that is the question!

    No muffler for me and at WOT she rattles the neighbors windows.............:burnit My wife and kids complain that they cannot hear the radio........I like to listen to the exhaust and whistle.:dunno I'll probably put the straight through muffler on that came with my kit when I get a...
  17. T

    Please Help.....Truck Stalling at stops.

    All Is Well Again Changed ICP and now we're :burnit again!!!!! The new ICP is a little different from the original which had me guessing for a bit, but after the install the throttle response is back, truck SEEMS to run smoother, and the stalling is GONE!!!!! :hail to all who helped...
  18. T

    Please Help.....Truck Stalling at stops.

    Rooster was able to point me to the ICP and suggested I may have a fuel pump on its last legs. Got the ICP ordered and I already have a fuel pump ready to go.....We'll see..... Thanks again Rooster!!
  19. T

    Please Help.....Truck Stalling at stops.

    I could not find it in the forum when I came back to check. That's why I reposted. Didn't know if it wasn't accepted or had been deleted/moved for whatever reason.
  20. T

    Please Help.....Truck Stalling at stops.

    One more cry for help with stalling.......!! I've posted twice but it keeps either being removed or disappearing. Truck quits every time I try to accelerate from a stop. Changed CPS and Fuel filter to no improvement. Truck idles fine and runs ok but throttle response lacks a little from...
  21. T

    Please Help.....Truck Stalling at stops.

    I'm replacing batteries and I will do the ICP sensor as soon as I can get my hands on one and figure out where it goes. I've posted twice on 911 and it keeps disappearing. Thanks for the help!!
  22. T

    Please Help.....Truck Stalling at stops.

    OK guys, it started AGAIN!!!! Truck will die trying to accelerate from a stop. Today, for the first time, it tried to die when I was accelerating from a "rolling" stop, but picked back up and went on. I have changed the CPS (twice) the ICP sensor (which eliminated the problem for a few...
  23. T

    oil leak under fuel filter??

    O rings on the HPOP is the 1st place I would look.
  24. T

    Noticed a larger than normal volume of......

    I think there is a small hump in the line under the truck where oil could accumulate. I will try the hump at the valve cover and see if that helps. I also noticed today that parked on a grade (front up) there was MORE oil than even before (baseball size), but after getting home there was no...
  25. T

    hypertech power module

    I used H-Tech for a while, then switched to Edge Juice, and now run the SCT 1705. Superchips is DEFINITELY the best for me. I would like to change on the fly, but most of my driving is the same and the SC made the best improvement in MPG. The only Caveat is I have a 7.3.

Members online

Total: 46 (members: 1, guests: 45)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top