Search results

  1. G

    MOBIL-1 Synthetic ATF warning!

    Dave I found the Mobil-1 multi vehicle ATF at Autozone. I called the 1-800 phone number on he Mobil-1 ATF bottle. They told me they will continue to make the "old" ATF that is not Mercon V rated. I did notice it was in the same colored bottle as the other Mobil-1 ATF.
  2. G

    Wrecked it.

    Sory to hear of your accident, glad you are OK. It will not be any fun dealing with the Ins. Co., I wish you the best of luck and a speedy recovery. Depending on the TX laws you most likely will not be able to buy it back unless you have a salvage license, at least that is how it is in IL for...
  3. G

    Homemade "Specailty" tool

    Another special wrench(s) that I have made are a set of "shorty" wrenches. I took an old set of combination wrenches and cut them in half to make two sets of shorty wrenches, one open ends, and one box. The 11/16 size works real well to remove the upper starter bolt after it is broken loose...
  4. G

    Need engine help!

    Which injector harness did you replace? There are two for each side. One under the valve cover and the other is outside of the v/c. check for burned plugs at the v/c gasket connection. The connection at the inj. do not fail very often. The connection at the v/c does. It will cause an...
  5. G

    7.3 PSD Costs

    Hello Bill welcome, I am Gregg who answered your post in Yahoo groups.
  6. G

    Ford Parts on Ebay

    BRR; No flame intended toward you. My local stealer has jacked his prices up so bad the only thing I get from them now are part numbers so I can buy the parts elsewhere. A cheap, but % of increase accurate example is; 1 year ago the engine drain plug copper washer was $0.95 each. After the...
  7. G

    Harley Davidson Edition grille question

    I got the grille from Tony @ Full Throttle Performance, it is a Ford grille not an aftermarket copy. It comes painted black, which was great since my truck is black. PM me if you need any more info. http://www.full-throttleperformance.com/Store/Store.htm
  8. G

    Harley Davidson Edition grille question

    I am installing a 2004 H/D grille on my 00 F350 truck. I need to know if the grille requires any special clips for the bottom tangs? My stock grille did, but the H/D grille is slightly different and looks as if it does not need any clips. The clips from my stock grille will not fit on the H/D...
  9. G

    SD starter relay part # ?

    I know Dale real well, but it is a royal pain for me to receive UPS due to where I live. So that is why I am looking for an aftermarket part number.
  10. G

    SD starter relay part # ?

    I need an aftermarket or IH part number for the starter relay that is mounted on the r. fender. It is not the same as a GP relay, it is a three wire relay. I have a Motorcraft # F5TU-11450-AA but the parts store can't seem to cross reference it. Thanks Gregg
  11. G

    Diesel Nationals at IRP

    Here is the schedule. http://www.dhraonline.com/?GROUP=series&PAGE=indexsched
  12. G

    Diesel Nationals at IRP

    Also ran into Maddog, House, Big Bad Dodge, Smokin,Van Haisley, Zane, Dennis Perry, Jodi Tipton. The Chevies came to town too. All in all from most to least there were Dodge, GM, Ford. Scheid had the best pull of 347'. TS was fastest with an 11.14. No records broken. bone-Who are "they"?
  13. G

    Diesel Nationals at IRP

    I have talked to D.Lott, DISTURBED, GSXRTURBOQUAD,wackerjr,and a few others. Snow White did not make it up, slow white(DRW,CC) did though. Seen a few nice looking Dodges, but very few Chevys.
  14. G

    Diesel Nationals at IRP

    I am here.
  15. G

    I've joined the BTS ranks today!

    BTS in Arizona??? :D I did call BTS in Arkansas, left a message but no reply.
  16. G

    I've joined the BTS ranks today!

    What year etc. is your truck? What is the part number for the BTS VB you used?
  17. G

    Engine Swap

    IIRC the C7 weighs about 1300#(dry) so add another 50-100# for wet, it is 43" long, 33" wide and 38" high. Compared to the 6.0 weight of 1062#. I do not have dimensions for the 6.0 L. Cummins B 5.9 weighs 950-1000#(wet), 40" long, 25" wide, and 38" high. When doing a Cummins swap it requires...
  18. G

    Brakes

    I see ART says 200% longer life, but the $ is about 400% more then regular rotors. That does not sound like a good deal to me. Has anybody tried the ceramic brake pads?
  19. G

    Spray-in Bed-liners

    I like Rino and Line-x
  20. G

    Union Grove, WI

    May 22, Diesel drags @ Great Lakes Drag way.
  21. G

    Adding more rear window tint

    I just had my rear window redone in 6% and my sides done in 50%. I like it a lot. I had mine done at Zebart. The tint is a very good fit, but the guys working there "are not the sharpest knifes in the drawer."
  22. G

    Tool box lid shocks

    I have a Knaak Weather Guard tool box on my SD. I can't read the model #. I believe it's a model 127. I am looking for a aftermarket part number for the gas shocks that lift the lid. I took my shocks into a few parts stores but they can't cross reference them for any they sell.
  23. G

    10K mod

    What color are the wires you connect the 10K mod to on a SD?
  24. G

    Got some time today

    Thanks Dale
  25. G

    York compressor

    Running air tools is exactly what I intend to do. I would like to set up a service truck of sorts. Some of my tools are quite greedy when it comes to cfm, believe it or not 11 cfm is a little low for what I need, I was told by tire service people to get a compressor capable of 18 cfm @ 175psi. I...

Members online

No members online now.
Total: 117 (members: 0, guests: 117)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,627
Latest member
castellscl

Latest posts

Top