Search results

  1. J

    2003 no start

    Finally found the problem it was the ICP Sensor was bad. Thanks for all the input!
  2. J

    2003 no start

    I am helping a friend on his 2003 F350 with a no start condition. I plled the codes and got a P0611 and a P2552. I ran a check on the FICM and had 48.5 volts before cranking and 47.5 to 48 while cranking. The injector buzz test was good. He said it had a crank and cam sensor code on it and...
  3. J

    Miles to Empty

    I just helped a friend install a Transfer Flow 50 gal tank on his 2011 SD. Does anyone know how to get the miles to empty recal'd?
  4. J

    FORD F350 1990 7.3 D E4OD TRANS PROBLEM

    Shounds like a broken band.
  5. J

    08 Superduty Plug in the bed.

    Just some info for some that are thinking of adding a plug in the bed of the truck. Do not try to tap into the wires going to the 7 way plug on the bumper as it will start showing trailer wiring faults on the dash. Need to use something like the Deaw-tite pn 20110 breakout and it will solve the...
  6. J

    Problems mounting air bags

    They make 2 different kits for the trucks...one with Reese fifth wheel brackets and one without.
  7. J

    7.3 Tranny problem

    Need to drop the pan and see if there is anything in there. Just had this problem on my tranny with no shifting into third gear and it was the intermediate band was broken. This is a common problem for the trannies.
  8. J

    Reese Quick Slide

    That is one thing that is bad about sliders
  9. J

    5th wheel and goose neck for X's and lifted trucks

    Did you all see the price on that thing 6495.00 That is not really worth it.
  10. J

    Reese Quick Slide

    If you want the instruction let me know and I will e-mail them to you.
  11. J

    exhaust/muffler installation

    I am down in the Charlotte area
  12. J

    Trailer Brake Controller

    95 is a plug in also. But you will need to add the 7 way the wires are all back there.
  13. J

    Crumm's Extended Hitch Project

    My humble apologies for not fully reading.
  14. J

    Crumm's Extended Hitch Project

    Not bad in theory but you have nothing that is load tested. If it ever had problems that would be a concern. Hopefully it will work well for you.
  15. J

    2008 F250 buyback today

    Let me know in NC
  16. J

    Toolbox + tonneau cover = ???

    Couple of brands you can go with for a soft cover try the Sportmasters... you will have to get your bed measured and it takes about a week to get it... or you can get an Undercover that works with the tool box. It is hard plastic and works pretty good.
  17. J

    Class V 2.5" locking hitch pin

    Good luck... Draw-tite has a locking pin for the 2.5 inch receiver but I think it is made in china also. The p/n is 63212
  18. J

    Engine surging

    Check your alt. output.
  19. J

    INSERTS

    Try Putco
  20. J

    new ford f-250

    By the way the Ranger only has a 3500lb hitch.
  21. J

    fender flares

    Look at the Bushwackers.
  22. J

    5th wheel wiring harness and Hitch

    The fifth wheel is top rate and also Reese/Draw-tite have a harness that T connects into the 7 way on the back and puts another 7 way just like the bumper one in the bed. We normally put them in the left rear stakepocket area
  23. J

    New trailer

    Does it have 6 lug wheels or 8 lug wheels? Nice trailer
  24. J

    what size dop hitch?

    You need to measure from the ground to the top of the reciever opening and then add 3 inches. Once you have that then subtract 19 inches and that should get you really close to the drop you need.
  25. J

    company info

    But they do not make the stock receiver on the Superduty or any Ford truck. Those are made by Valley

Members online

No members online now.
Total: 173 (members: 0, guests: 173)

Forum statistics

Threads
30,517
Messages
266,070
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top