Search results

  1. P

    2000 7.3 rough running

    Thank you!!
  2. P

    2000 7.3 rough running

    Hi every one, my 2000 7.3 is rough running, no codes, I changed the valve covergaskets, internal wiring and glow plugs recently,this problem was going on before that.also i changed the cps. and checked the tps with a scanner. I have heard that I can/may have a problem with the hi pop oil system...
  3. P

    99 7.3 loss of power

    Hi guys I have a 99 f350 with 220k. It started acting like its starving for fuel. in park it idles and revs up fine. when you drive it and pull any hill it blubbers like its running out of fuel. no dtc's of course new filters. Is this a symptom of the lift pump?Is there a pressue check for the...
  4. P

    2007 f250 6.0 died while driving

    Thanks Guys I shipped it to the dealer.....would you like to know when I get it back?
  5. P

    2007 f250 6.0 died while driving

    Thanks It did have a HPOP installed under warrenty @ 48k Is it possible that it is a goner also?
  6. P

    2007 f250 6.0 died while driving

    This truck has 70k miles and it just died while driving. No DTC codes. Truck cranks ok but no start
  7. P

    Dtc p1276 runs poorly 2001 7.3

    HI everyone any ideas about this dtc code. BTW whats with all the flashing banners?
  8. P

    99 no start

    Hi guys I have a 99 f350, wont start cold, will start with block heater plugged in. check eng lite is on and the code is p1393 low input bank#2. Any ideas?
  9. P

    2000 p./s rough running

    I have a 2000 p/s just started running rough. check engine lite is on. DTC codes are 1278 hi to low side open and 1316 injector circut IDM codes dectected. Any ideas? thanks guys
  10. P

    Trans codes po 500 1670 720

    I just installed a ford rebuilt trans in a 2002 f550 now I have a few codes, Po5oo po 1670 po720. and my scanner wont go into troubleshooter on some fords. any ideas? regards
  11. P

    2004 6.0 po299 turbo underboost

    Thanks, you know it is a little rough running. I do hate taking anything to the dealer. I guess my hands are tied
  12. P

    2004 6.0 po299 turbo underboost

    Hi guys I have a 2004 f250 6.0 litre.seems to run ok.check engine lite is on.I scan it and I get a dtc po299 turbo under boost. any ideas?
  13. P

    02 p/s dies in reverse

    Thanks.......... I guess I have some more stuff to try.
  14. P

    02 p/s dies in reverse

    I have a 2002 p/stroke automatic. It stalls the engine when I put it in reverse. It has no dtc codes,,when I unplug the neutral safety switch it goes into reverse ok.I changed the vss. any ideas? Dave
  15. P

    leaky oil plugs in head 97 p/s

    Thanks I'll try that when the truck gets back in the shop
  16. P

    serious opinions needed

    I have owned a small private shop that I have operated for 6 years.I worked for a lot of companies over the years. As I got older and wiser and honed my people skills. Becoming a personal mechanic was the next obvious choice for me. I genuinely like the people I work for, also customers sense...
  17. P

    leaky oil plugs in head 97 p/s

    I tried the flexhead ratchet...Now the square hole is kinda mashed over. hard to believe a dealer would hole saw a access.I was looking at a later model one today (2001) It looks way harder to get to.
  18. P

    help with high pressure pump

    Thanks for getting back to me.Its hard to tell where its leaking. There is a lot of oil in the valley.I cant see any drips while its running.Although its hard to see all the fittings and the h/p pump And i dont think I can run the engine w/ the filter housing removed.I checked with the local...
  19. P

    help with high pressure pump

    2000 f350 p/s I have a high pressure oil pump that is leaking oil. Does anyone have any tips for changing it out?
  20. P

    leaky oil plugs in head 97 p/s

    i have a 97 p/s. the large plugs in the head are leaking oil. I changed the right front.The left rear is a different story. Does anyone know any tricks for getting that one out. It is tempting to hole saw a access hole in the floorboard.
  21. P

    2000 P/S no start

    I finally got the nerve to buy the injector driver. It works! Thanks guys
  22. P

    2000 P/S no start

    Thank for getting back to me. The maxi fuses are good including#22. I checked the cps w a fully updated snap on scanner. it was displaying eng rpm while cranking. and have not had any codes for the cps ( scanner calls it a cmp) dont know why. wiring at v/cover connectors check good. truck has...
  23. P

    2000 P/S no start

    I am new to this site.I have a 2000 f350 power stroke.55k miles stalled the other morning in the driveway.cranks good no smoke. I do have a scanner. codes are p1293 and p1294. cmp checks good.will not buzz the injectors w/ the buzz test.i have learned that injector drivers fail often, also valve...

Staff online

Members online

Total: 57 (members: 2, guests: 55)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top