Search results

  1. TankRN

    Jump Box Recommendations

    Thanks for the recommendations. I’ll look into them.
  2. TankRN

    Jump Box Recommendations

    Howdy gents. It’s been a while since I posted, but I have run into something and need some advice. My truck had a dead battery the other day. I tried to use a jump box with 850cca, to no avail. All is well now, but do you have any recommendations for a jump box that can handle the big load of a...
  3. TankRN

    Engine light (Solid) not blinking

    I had a light come on the other day and took it over to O'Reilly. They had a computer and cleared the light in no time. It was a simple fix also. The cap on the DEF was loose and lost pressure. The auto parts stores usually have the computers and will clear them. I also bought an EDGE CTS2...
  4. TankRN

    Exhaust kit

    That is what I was afraid of... Sounds like I'll save the cash and do something else. Thanks.
  5. TankRN

    Max Tire Sizes

    I looked around and couldn't find an older thread, so if this is a repeat, I apologize. I have a 2016 F250 SRW. I am not wanting to put a lift kit on the truck because of some height restrictions at work. However, I want to put tires on that are wider and fill out the wheel well a little more. I...
  6. TankRN

    Exhaust kit

    Morning. Just reviving an older thread. I am looking at a DPF back exhaust system. I'm looking at magnaflow dual exhaust tip, stainless steel with a 5" pipe. Keeping all the EPA junk and only removing the "muffler" if you can call it that... I'm hoping to get a little more sound and turbo...
  7. TankRN

    Anti theft system

    Hey gents. Is there a vehicle recovery system that you guys recommend. My insurance premiums will drop if and. When I get one installed. I've looked at LoJack but the coverage is lacking. I used to have a GMC and the OnStar vehicle location system was part of the trucks coverage. Does Ford have...
  8. TankRN

    Engine Programmers

    Thanks for the replies. I'm not wanting to put a power tune or gain HP. I agree with yeller. I don't pull anything that heavy. I'm more only interested in the economy tunes and increasing fuel economy more than anything. Joe, what you did sounds like a good idea. I'll get in touch with the...
  9. TankRN

    Engine Programmers

    Hey gents. I appreciate the level of knowledge I'm gaining from reading the posts on the forum. I'm new to the diesel world and still not sure of what is and isn't a good idea. I have been reading about different engine programmers and monitors. I see alot of you monitoring EGT and Trans...
  10. TankRN

    Hello All

    Looks good. I'm trying to decide if giving up my nice garage parking spot is worth about a 3" or 4" lift.
  11. TankRN

    Another question from the diesel noob!!

    Thanks gents. I appreciate all the insights. Being so new to the diesel world and hearing about the expense of messing something up, I want to do whats best from the start. Thanks again. Keep the info coming. I enjoy reading it.
  12. TankRN

    Hello All

    Nice rig. What size lift does she have? It looks good.
  13. TankRN

    Thinking about wheel spacers

    On a new topic... Has anyone found a 2" receiver that mounts high on the front bumper? Everything I've found mounts down below the trim on the bumper. I used to have a mount that was hidden behind the license plate and had a flip up bracket. I don't want to do a full bumper replacement, but I do...
  14. TankRN

    Another question from the diesel noob!!

    This is why I put it on here. I never would have thought to ask about that piece of it, Jasper. Great info Mr. Griffin. Thank you.
  15. TankRN

    Another question from the diesel noob!!

    SDD brain trust, do you recommend any type of additives at any interval? Fuel additive every fourth or fifth tank of fuel, for example? Still learning the diesel world. I'm sure I'll have more questions. Thanks for the feedback and the patience.
  16. TankRN

    Thinking about wheel spacers

    No worries. I'm asking for opinions. The way I worked it out in my mind: 1. With a wider wheel the point of contact to the hub is essentially the same, therefore, the stress point and angle are the same. 2. With a wheel spacer the point of stress and angle produced is further outboard. I'm no...
  17. TankRN

    Thinking about wheel spacers

    Thanks Cobra. I'm just looking for a little wider stance on the truck. I'd like for the sidewalk of the tires to even up with the fender flares. I think I may just go with a little wider tire. I'm also looking at a little wider wheel that will allow me to go to a 35x12.50. That will give the...
  18. TankRN

    Thinking about wheel spacers

    Thanks for the confirmation, Joe. Will I experience the same problems if I move to a little wider wheel with a different offset, or does the fact that it mounts in the stock position on the hub negate that wider stance?
  19. TankRN

    Thinking about wheel spacers

    Howdy. I'm new to the SD world and have been doing a little reading in the forum here. I'm considering wheel spacers to push the tires out some. I just like a little wider more aggressive stance. Stock wheels and tires, 20" wheels with 275/65R20 Toyo or Nittos (Crap I drew a blank). Anyway I...
  20. TankRN

    Noob First Time Super Duty Owner

    Honestly, I don't do a tremendous amount of hauling. I typically am pulling a boat, but do occasionally pull a trailer with 6-8k. Nothing major.
  21. TankRN

    Noob First Time Super Duty Owner

    I will get with the program. I've got to train myself to get "fuel"and not "gas". I'll do my best to make the changes.
  22. TankRN

    Signature test

    That's all I can get on it. Says its too long.
  23. TankRN

    Signature test

    Test
  24. TankRN

    Noob First Time Super Duty Owner

    Thanks! I'm proud of her. That is my "dream truck". I've been wanting that thing since I started driving with my Grandpaw when I was 12. I'm definitely watching the gas pedal. I'm learning it by keeping an eye on instant mpg at first. It helps to see that number. I have a habit of calculating...

Members online

No members online now.

Forum statistics

Threads
30,506
Messages
266,043
Members
14,622
Latest member
rhensonsr
Top