Search results

  1. randybarkwill

    Help Needed '11 350 Won't Start!

    Remove belt and make sure ac isn’t seized. Remember 11’s have bad crank bearings, and often seize the crank. Sent from my iPhone using Tapatalk
  2. randybarkwill

    07 ford powerstroke code p0046

    It’s also a ground controlled circuit. PCM uses pwm to change unison ring position. Check the ground side of the circuit with test light at the vgt. I’ve seen many pcms not control the turbo. Remember 03-04 have a different pcm than 05-07 trucks if that’s the repair and a used pcm Is needed...
  3. randybarkwill

    Broken dipstick tube

    Once that bolt is out the tube should come out with a little bit of force straight upward. It basically goes into rear cover vertically but has a couple o-rings on it that can cause a headache. You should be able to see it if you’re underneath it looking up on drivers rear of engine.
  4. randybarkwill

    comment 2017 f250 with 4" procomp stage 2 lift and 35" tires

    It doesn’t lean back is what I meant it runs great....for stock Sent from my iPhone using Tapatalk
  5. randybarkwill

    comment 2017 f250 with 4" procomp stage 2 lift and 35" tires

    Bushwackers Sent from my iPhone using Tapatalk
  6. randybarkwill

    comment 2017 f250 with 4" procomp stage 2 lift and 35" tires

    The tires wouldn’t clear the bushes jets so I added a 1” spring spacer and 1.75”block for rear and now it doesn’t run and sits 1” higher in rear, I’ll put up a newer pic. Sent from my iPhone using Tapatalk
  7. randybarkwill

    Outfitter switch wires

    Yes that plug in the back behind the cluster is a pain to plug in, same as the ground. Sent from my iPhone using Tapatalk
  8. randybarkwill

    Cruise Control - won't turn on

    Check the cruise cancel switch on the master Sent from my iPhone using Tapatalk
  9. randybarkwill

    Trouble starting

    Take belt off and crank it over, I see a lot more of seized ac compressors nowadays on 03s and 04’s, is it early build engine with icp in back? They can also cause this issue, usually sets p2285
  10. randybarkwill

    comment 2017 f250 with 4" procomp stage 2 lift and 35" tires

    Lifted this one at work, 2017 xlt 6.7, 6” procomp lift, bushwackers, 22x12.5 American Force 38” Snipers. And some Amp boards. Sent from my iPhone using Tapatalk
  11. randybarkwill

    DTC P04DB

    This code is for the crankcase ventilation separator saying there’s no flow through the sensor, only koeo, wilhich shouldn’t have any anyway since the truck isn’t even running when it sets the code. Replacement of the ccv and an update always fixes it. Done many Sent from my iPhone using Tapatalk

Members online

No members online now.

Forum statistics

Threads
30,506
Messages
266,043
Members
14,623
Latest member
F350 On Track
Top