Search results

  1. D

    Truck has NO POWER, can't spin wheels in wet grass...

    You just be happy you didn't have to work on my van 2 weekends ago. No shade, 122 degrees. Blew an oil line right out of hpop. Dann
  2. D

    Truck has NO POWER, can't spin wheels in wet grass...

    Dont know about your truck, but my engine has a line rubber line going from the map sensor to intake. Forgot to install one time and had no power like you described. If line has hole in it, you would get same results. Im sure you have checked it already, would hurt to check real good for a...
  3. D

    Truck has NO POWER, can't spin wheels in wet grass...

    Been thinking about your problem. One thing to check that would give you those symtoms is your map sensor line. If it is off or broken, it will give you the same symtoms. I would check that first. Good luck Dann
  4. D

    Truck has NO POWER, can't spin wheels in wet grass...

    check your engine oil level. Check all air connections after turbo. make sure none are leaking. Dann
  5. D

    and the saga continues

    multi function switch? Just a hunch Dann
  6. D

    Transmission sticking in 2nd gear

    I just knew it. I would be in trouble as soon as I got on this board. Thanks to Rich for dragging me here. He told me this board was friendly and down to earth and a couple of cuss words here and there don't land you in prison. Actually, from what I see I like this site better. Rich is right...
  7. D

    Transmission sticking in 2nd gear

    You aint gonna like me on this one. Im at 143,000 mi. Never touched the tranny nor changed fluid. Long story, but I will explain my reasoning if anyone wants to hear Dann
  8. D

    E-350 upgrades

    Are you guys saying you have an intake system for our vans? Thanks, Dann P.S. Girls called from Las Vegas, van is running great. 5 hour drive. Relief!!
  9. D

    something blew

    ok, all buttoned up. Got home early to finish. Ran her and she didnt run so good. Idled great. Got on trottle and she drove normal until rpm got up and then she would fall flat on her face. Went back to idle and was missing real bad, then cleared up. Hit the trottle, same thing. Smooth till...
  10. D

    something blew

    last pic is one with my girls doing a restoration on a 73 Nova ss. I love working with them and am thrilled they want to learn
  11. D

    something blew

    ok, thanks to 95 stroker here are some pics. Hope they work
  12. D

    something blew

    no wonder you can work so fast on your cars I got a fan up my a... to keep me cool. The dog wont even bark
  13. D

    something blew

    you aint gonna believe this, 104 degrees outside. It's 7:45pm Dann
  14. D

    something blew

    Thanks Ryan. I know if you cross thread something, this can happen. At no time did I put blame on anyone. If I cross threaded or over tightened, I dont know. All I can say is with yrs. of experience, I try to do it right the first time. It is what it is. Thank you for responding to this...
  15. D

    something blew

    Thanks Rich. I will finish today. Just need up pipes intake filter and a few small thinngs. Another 1-2 hr. Will do after work. No weekend for me. Dang. Had to quit yesterday, thought I was gonna die with the heat. Just couldnt anymore. I will be happy when she is buttoned up. I will...
  16. D

    something blew

    finally lit after cranking 10-15 times. Didnt fill resevior. No leaks, will button up now. So gaskets were fine, hpop's were fine, just blew the fitting right out. Don't know why. But now I will be able to see how much difference with no strealth set up. I am not running chip or injectors...
  17. D

    listen to this.....

    Do you have a temp probe? Is it out and there is a hole in up pipe? Dann
  18. D

    listen to this.....

    Rich, that sound is not internal. It is clicking to the RPM of the cam. Every other revolution Dann
  19. D

    something blew

    Ok, center gasket between pumps had no blowby. Changed back to factory stock pump. Is installed and I have cranked once so far. Have turbo delete plate on so I can start to make sure no leaks. So far so good. Would like to get running today. Any tiny midgets out there that can crawl in for...
  20. D

    something blew

    ok got her out. Yes blew the fitting right out of the pump. Aluminum threads still on the threads. Hole in pump pretty clean now, no threads. Front gasket has no evidence of blowby, will check center when I get her apart. I can take some pics, but don't know how to post Dann
  21. D

    something blew

    Back on it today. Already hot. Started to take lines off and unscrewed back fitting for the solid line connecting two pumps. That's all I had to take off because the front was already off. Pipe came right out. The fitting that screws into front pump had blown out. Just great. Now I will...
  22. D

    something blew

    Hey Rich, On the back pump, I notice that right next to where the ipr is suppose to be, there is a brass plug on side of hpop. It is hitting the valley chamber wall. Don't remember that before. Dann
  23. D

    something blew

    Ok, found it. Cranked her over and can see oil gushing. Gasket between the two hpop's. Gonna pull them out and go back to stock. I cant have it going again in middle of nowhere. Dann
  24. D

    something blew

    Turbo out, oil in valley and down drivers side exhaust manifold. Charging batteries now. Will install plate to cover turbo holes and try to crank in about an hour. Maybe I will have some luck to spot the leak. Dann
  25. D

    something blew

    ipr in front pump. Didnt work in rear, blew everything to kingdom come when I had it in rear. Ok, just disconnecting up pipes and I can see a lot of oil on exhaust manifold drivers side. Towards front of oil filter. Oil filter a little dirty, but dry. Also oil filter housing dry. I do...

Staff online

Members online

Total: 153 (members: 1, guests: 152)

Forum statistics

Threads
30,517
Messages
266,070
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top