Search results

  1. G

    what do ya'll think?

    buy stg2 and buy hpop i have stg1 wish i would have got stg2 because i still have to buy a oil pump because of a 1211 code
  2. G

    Intake spider

    i need just a plain stock one i have a intake spider for a early 99 and the tanks for the heads but i went in a diffence way the intake spider comes from the turbo to the heads it is how the forced induction work thanks
  3. G

    Intake spider

    Hey I need an intake spider for a 96 7.3 in a bad way if anybody has one that want sell please let me now thanks
  4. G

    idle problem

    well i fixed my truck i the pcm reflashed by jodi now it is great
  5. G

    idle problem

    i pulled the ipr off the truck and cleaned it i took it apart and cleaned it still the same deal did not change anything thanks
  6. G

    idle problem

    i pulled the fuel filter housing and the harness going to the ipr was trashed so i fix it did not fix problem but i have not every had the a ipr off so do you just take the nut loose and screw it and clean it thanks for help
  7. G

    idle problem

    i changed oil did not change anything i unplug what i would call a pressure sensor front of driver side head it change got to be a fast rpm jump
  8. G

    idle problem

    thanks ill try that and see what happens
  9. G

    idle problem

    no it has between 3000 to 4000 on this oil change when it idles crazy it will black smoke but when putting the chip back in it will clean the camming idle up
  10. G

    idle problem

    last oil change few thousand miles ago fuel filter about 1500 miles and cleaned screen at same time
  11. G

    idle problem

    i have a 96 f250 7.3 when i start the truck it has a bad idle surge about 500rpm but you throttle it up for about 10 second and then it idles fine i did have a bd chip and the truck got to acting funny so i took it out then a few days later it started acting this way so i put the chip back in a...
  12. G

    hello map sensor question

    I JUST PUT $2000 OF INJECTOR IN HIS TRUCK SAY THERE NOT ANY PROGRAMER PUT ON HIS SO MAYBE I AM IN LUCK HOW ABOUT THE DOWN PIPE WILL NOITCE A DIFFERNCE BUT THE OTHER GUY CUOLD GET A CHIP FIXED UP THAT WOULD WORK GOOD I ALSO TOW WITH THIS TRUCK SO THAT MIGHT BE A CONCERN WUOLD A FTVB BE A GOOD...
  13. G

    hello map sensor question

    IT IS A BD CHIP I STILL HAVE THE STOCK DOWN PIPE ON TURBO LAG WHAT CAN I DO TO MAKE IT BETTER I DRIVE THE TRUCK EVERY DAY BUT I WANT IT TO RUN THE BEST IT FOR A DAILY DRIVER MY BROTHERINLAW HAS A 04 DURAMAX AND I CAN BARLY RUN WITH HIS TRUCK STOCK THANKS FOR YOUR HELP
  14. G

    hello map sensor question

    change the fuel and cleaned the screen turbo is in stock trim
  15. G

    hello map sensor question

    Alright it happens all the time at any piont below 2000rpm I have a 30hp chip open exhuast cold air intake shimmed fpr truck can be rolling a few mph and nail it and fall on its face and then pick up and go
  16. G

    hello map sensor question

    thank you well do you have any ideas on the bogg then
  17. G

    hello map sensor question

    Alright maybe you are the guy I need to talk to what I am trying to do is get the part throttle bogg out of the truck I undersood the map sensor by the scan tool to read the same as a manual gauge if I am wrong that maybe better but anther question is the obd2 connector wont power scan tool with...
  18. G

    hello map sensor question

    I am new to the diesel world I just bought a 96 f250 psd it is a good truck but it seems to have a part throttle bogg now my question is the map sensor reads about 15psi at idle and will run up about 33psi at wide open throttle put a manual gauge on the truck and at idle about 0psi i didnt try...

Members online

Total: 74 (members: 2, guests: 72)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top