Search results

  1. T

    99-03 Healdlight upgrade

    I recently replaced my front headlights with the Silverstar's. Got them from Autozone for around $40. They are alot brighter than stock. They put out a much more white light as opposed to the stock yellowish light. I've put the Silverstar's on every vehicle i've owned for the past 3-4 years...
  2. T

    burnt smell from front d.side hub

    Just a quick update. Installed the dynatrac hub conversion kit over the weekend and it seemed to fix the problem. I went ahead and ordered new new knuckle-to-spindle studs and new nuts from ford (about $25-30 total from dealer), put in some new steering axle ujoints ($55 each from carquest!)...
  3. T

    burnt smell from front d.side hub

    I ended up biting the bullet and ordered the Dynatrac hub conversion kit from OffRoadUnlimited. They said that they have 3 in stock (now have 2) as of today. $1695 with free shipping if you order online. From the pic i got from their website it doesnt look like it included the wheel studs...
  4. T

    burnt smell from front d.side hub

    On the ride in to work this morning i noticed an occasional clicking sound coming from the front d.side area. And also in stop and go traffic i did notice a fairly violent shaking/vibration coming from the front end somewhere. The steering wheel was vibrating along with this. But the violent...
  5. T

    burnt smell from front d.side hub

    Worst case, and if we can swing it now, where can i get one of the Dynatrac hub kits for the best price? Tim
  6. T

    burnt smell from front d.side hub

    I meant to say that both of the hub assemblies were replaced by the 1st owner. Tim
  7. T

    burnt smell from front d.side hub

    On the way home today i started to smell a burnt smell. Didnt think much of it, figured it was just someone else in traffic. Well when i got out of the truck in the driveway i noticed the same smell. I followed the scent and it seemed to be coming from the front drivers side hub. Any ideas...
  8. T

    engine died at highway speed?????

    Well i've driven it for the past few days and it hasnt died on me since i removed the hypermax chip. Hopefully that was the cause of the problem. Tim
  9. T

    engine died at highway speed?????

    Yes the check engine soon light came on after it restarted one time. And another time when it restarted the check engine soon light didnt come on. I removed the hypermax chip to try to narrow it down a little. I have no way to check the codes right now until the code scanner gets here early...
  10. T

    engine died at highway speed?????

    Well i went to the local International dealer and bought a new cps and icp sensor. I replaced the cps because that was what i thought the problem was. Well it wasnt. It is still dying on me. I replaced the cps and took it for a test drive and it exhibited the same problems that i experienced...
  11. T

    engine died at highway speed?????

    Ordered a autoengiunity code reader yesterday. On the way to work this morning i warmed up the truck for about 10 minutes then left for work. About 1-2 miles later the truck completely shut off. When i tried to restart it the "wait to start" light did not come on. I tried to start it for...
  12. T

    engine died at highway speed?????

    When the truck cut-off i had steady pressure on the fuel pedal, going 65-70 mph steadily for the previous 5 minutes or so. I wasnt accelerating hard, or doing anything really different or make any changes or flip any switches or anything like that. It was like the engine cut off and the rpm's...
  13. T

    engine died at highway speed?????

    On my way home from work this afternoon i was crusing along at at highway speed 65-70 mph and my truck cut out. It did not completely die, but the instrument cluster flashed on and the engine cut out (i could hear that) and then it "restarted" and i kept going. It did this 2 times in a matter...
  14. T

    transmission issues/questions

    Well going by what dieselsite.com said about the external filter kit for the tranny that i put on, it said that the filter replacement gauge *may* show up in the replace section when it's perfectly fine if the chip you have increases the line pressure to the trans. And my filter gauge does...
  15. T

    transmission issues/questions

    I only put in the $50 sonnax kit with the new valve and the 3 springs. I torqued the bolts down to 80 in/lbs according to the wiki article i printed out. As for the shifts i didnt mean that the 2-3 shift flet sluggish. It was doing it again on the drive home tonight. When it shifts into...
  16. T

    transmission issues/questions

    I've had my truck for about two months now and i am having some problems with the transmission this past week. First off the truck has 103k on it and the transmission is a factory rebuild from Ford and was done about 8-9k miles and a little less than 1 year ago. I am guessing it had a single...
  17. T

    Magnefine filter questions

    Butch, Thanks for the help. Dmd, I am going to flush it myself. I too have heard of too many horror stories of people getting the trans flushes at the local jiffy lube and the problems that occur afterwards. I try to take care of all the maintenance on my vehicles myself. It's alot...
  18. T

    Magnefine filter questions

    I recently bought a new to me 2000 f350 cc lb 4x4 truck with 102k on it. I am planning on changing all of the fluids in the next couple of weeks. I am going to do a transmission flush and at the same time i want to install one of the Magnefine filters. Which size do i need to order, they...

Members online

No members online now.
Total: 34 (members: 0, guests: 34)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top