Search results

  1. DozerDoug

    Union

    Operating Engineers Local 302
  2. DozerDoug

    Can you beat this??

    Yeah!!! Sucks don't it. Colder then a witches ankle and no snow.
  3. DozerDoug

    starting problems

    It sure sounds like the starter. I'd get it changed as soon as possible. It isn't hard to change at all. No different then any other starter really. If you can find one get a gear reduction starter. I don't have one but I've been told they are the trick.
  4. DozerDoug

    TS or TWILDMAN CHIP?

    TWildman!!!! I have some of his burns on my chip and WOW!!! TS has a fine product, but Tony is the best at burns for the obs trucks.
  5. DozerDoug

    Tranny Rebuild

    With that tranny you should be fine with the exhaust and intake. Even a chip probably won't hurt it too bad. I put the sonnex valve and trycumulater springs in mine years ago. I think they are a very good mod for the stock tranny. I've pulled and hauled more then probably 90-95% of the guys...
  6. DozerDoug

    Tranny Rebuild

    With that ttranny you should be fine with the exhaust and intake. Even a chip probably won't hurt it too bad. I put the sonnex valve and trycumulater springs in mine years ago. I think they are a very good mod for the stock tranny. I've pulled and hauled more then probably 90-95% of the guys...
  7. DozerDoug

    tire Q for a dually

    Well it is hard to tell without actually measuring them. With the metric measuring systom, the first number is how many millimeters wide the tire is. The second number is the aspect ratio, I/E 85= 85% of the width is the hight of the sidewall from the rim to the tread. 75=75% and so on. So a...
  8. DozerDoug

    A new place to play

    Thanks
  9. DozerDoug

    Snow Towing

    About all I can add is load the trailer correctly and DO NOT use a weight distributing type hitch. Just use the ball. I've pulled several guys out of the ditch that had their equilizer bar set tight. I actually puts less weight on the drivers and can cause rear wheel slippage. loading and...
  10. DozerDoug

    A new place to play

    Thanks for the kind welcome guys. Like I said I like it here. I guess you'll probably have to put up with me some more.
  11. DozerDoug

    How hard to gutt EBPV?

    Crumm probably has the directions, If not you could do a search over at the other place. I have a double pole double throw sitch in mine. It is wired up so that in one position the pcm controlls the ebpv. In the middle the ebpv is off. In the last position I have power going through a jake...
  12. DozerDoug

    A new place to play

    Well after an invite or two I finally slid over to check you guys out. Nice place ya got here. I see myself spend even more time on the computer.
  13. DozerDoug

    new mods

    Yeah Crumm, I may have 18 beat but only by a point or two. Serously I need to get down there to the track and time it. Back on topic, I hear you did pretty good out there Luke!! To the tune of 12.53 at 110 mph.:thumbs Thats sweet!!!
  14. DozerDoug

    How hard to gutt EBPV?

    Yeah, Yeah, Yeah, I still check out the other quite abit but I spend alot of my time at ClassicBroncos.com:cool:
  15. DozerDoug

    test

    ttt
  16. DozerDoug

    How hard to gutt EBPV?

    You can do it if you want but I would wire it up as an exhaust brake. You can use a dpdt switch and still have the factory setup, an off setting and also an on setting for the brake.

Members online

No members online now.
Total: 144 (members: 0, guests: 144)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,628
Latest member
Svttim

Latest posts

Top