Search results

  1. P

    (4) 35x10.50x16 SRR Radials (SSR-41R) on OEM Steelies - Almost New - GA - $1500

    (4) 35x10.50x16 SRR Radials (SSR-41R) on OEM Steelies - Almost New - GA - $1200 Set of 4 35x10.50R16 SSR Radials on OEM (99-03) 16x7 steelies painted black. Balanced with 10oz of offroad dynabeads each ($80 of beads) and some lead weights each. Run out smooth and true to 80+. Bought new...
  2. P

    No A/C at idle? compressor cycles rapidly, or stays disengaged....works at speed

    subject says most of it. A/C works fine at speed, very cold. At idle, the compressor cycles rapidly (few times in a few seconds) and then just stays disengaged. No A/C trouble or work since I've owned it, ~3 years. Help? I'm thinking low charge? Paul
  3. P

    HPOP Leak, Non-serviceable plug?

    OK, my HPOP is leaking (again) and I've finally traced it to the plug with the green arrow in the attached pic. Is this the venerable "non-serviceable" plug? I have read a bunch of old posts saying some have fixed it, others just replaced the hpop. Does anyone here have personal experience...
  4. P

    Help me pick a tire....BFG MT KM2, ATKOE, TOYO AT, MICH LTX M/S....others?

    so...help me pick a tire. I got something like 20k miles out of the set of mastercraft courser at2s i put on last march, with a lot of chunking to boot. file those away under tires i'll never buy again. So, I'm sticking with the 285/75 variety, but having trouble deciding if I should go...
  5. P

    DIY Tint done... results, thoughts

    Well, some of you might remember I asked if anyone had ever tried to do tint themselves... the responses were kind of mixed, but I figured what the hell and went for it. I bought 35% HP Smoke tint film from Window Tinting at SnapTint.com. the pieces come pre-cut to the window and fit...
  6. P

    crash bar...

    not sure what year it was added, but i guess sometime in 00 or 01 or 02, ford added the crash bar and lower trim to the front bumper just below the front spring mounts. I want to remove mine. Any drawbacks? The way I see it, it may cause me to go OVER a honda, instead of transferring all...
  7. P

    flushed sail panel tweeter mounts, components install, dailup run and hide

    alright, here's the system specs: current: sony headunit, autotek 900.4 stealth series amp, ED 11ov.2 sub in a custom box. in progress: CDT EF-61 comps in the fronts, peel n' seal roofing material as sound deadening on the back cab wall. this is gonna be it for the truck stereo...
  8. P

    someone take me to school on bilstein shocks and part numbers

    alright, my stockers are totally trashed, so after searching it seems like a majority of the people are very happy with bilsteins. now, my question: the bilstein website application guide for the HD's, here: Bilstein, where you then click here: http://www.bilstein.com/303truckssuvs.pdf...
  9. P

    Unit hub bearings, axle shaft seals....?

    Fellas, I've got two shot unit hub bearings at 140k. I'm looking to snag a set of timken replacements. i have some questions: I noticed while noticing that the axleshaft had up and down play inbetween the knuckle and inner C, I found that I have an oil leak out of the axle tube on the...
  10. P

    Powerslot Rotors, Hawk LTS Pads...couple pics and review

    I was going to do a good writeup, but there are super detailed ones available on the net, and my motivation to take pictures waned quickly when the rain meant I had to pull my hot-just-drove-30-minutes truck into a 21'x12' non ac-ed garage and it started to flirt with 115* in there...
  11. P

    console to jumpseat swap. and pics of sub enclosure.

    sooo.... I wanted to change out my armrests and center console for a jumpseat, and i did. I bought the jumpseat off of ebay. He called it an "'06 take out" that had never been used, but its a little old for that. it has a tiny signs of use, but nothing major. Old and busted: New...
  12. P

    dp tuner install pics and thoughts

    So I made a little trip to Hoschton Saturday morning and got a chance to meet Jody and pick up my new F5 and switch. Very sweet setup, and great customer service off the bat considering he was willing to let me come to his house on a Saturday morning (when they are not open) to pick up my...
  13. P

    ccv mod, foil delete, AIH delete, gauge install with pics

    ccv mod, foil delete, AIH delete, gauge install with pics paul
  14. P

    Looking for F350 rear blocks

    where's the best (read: cheapest) place to pick up a set of 350 rear blocks and ubolts? Paul
  15. P

    need some quick help, probably CPS??

    ok, 2002 7.3L manual, 120k miles, i think original cps. I'll be on the interstate just cruising around 65mph, and i get a real sudden power loss, and it picks right back up and keeps going. lately the power loss has been more pronounced, and sometimes longer or kind of a rapid stutter...
  16. P

    hpop o-ring replacement, without disco tool, with pics

    tools you need to do the job: ratchet & sockets, incl 8mm. extensions stubby 3/4" wrench (would be ideal to have a 3/4" flare fitting wrench, but i coudln't find one) regular 3/4" wrench Parts you need to do the job: o-ring kit (from ford: p/n 2C3Z-9G804-AB, mine was $28.00)...
  17. P

    oil leak at bellhousing weep hole/vent??

    ok, quick description. 2002 7.3 6spd 4x4 My truck's oilpan was dry as a bone when I climbed under there to do my first oil change on her. I put in 15-40 rotella, and soon after I had oil dripping from the oil pan. I figured at first my drain plug was loose, but it wasn't. Now, I have oil...
  18. P

    many questions, power loss, oil leaks...

    sup fellas, on friday, it was about 15 degrees in ATL, and started the truck at about 5 am with almost no trouble. drove it for about 20 minutes, and shut it down until 9 am. at 9, it didn't start on the first try. second try it fired up, but was missing pretty bad. settled down and ran...

Members online

No members online now.

Forum statistics

Threads
30,506
Messages
266,043
Members
14,623
Latest member
F350 On Track
Top