Search results

  1. B

    08 diff cover?

    The one for the duallys dana 80 is 6c3z-4033-a the stealer sells it for about 175.00. Im going to order mine from directfordparts.com. They have it for 122.00 plus shipping. Im not sure if you might need a new set of bolts,i know the one for the srw the cover is a little thicker and you need...
  2. B

    water temperature

    I have an 30 f350 drw and i pull a 40ft gooseneck all day long.I have installed a water temp. gauge and i get up to 200 while im on the hwy and up to 210 on stop and go trffic.:)
  3. B

    Intake modification Question

    Hey f350drw1 you are right,the elbow on the 05+ trucks is taller.However flopster 843 is correct about removing the whole assembly,which is the elbow then removing the plate assembly and you will be able to put an 05+ elbow on a 03/04 model. I read on another diesel forum that it will throw a...
  4. B

    Oil pressure gauge Installation help needed

    O.K. so i guess nobody knows how to tee of of the factory oil press unit? I know there was a forum about this a while back but i caint find it.:hail
  5. B

    Chuggin

    Like roy said it is a pain to get to.If you get under the truck you may not see it because their is a heat shield that kind of covers it.You can see if you can reach for it and try to take the heat shield of,its bolted on by two bolts.I bought one at the stealership once for about 125 bucks but...
  6. B

    Oil pressure gauge Installation help needed

    O.K. so its Monday and I didnt install my oil press. gauge this weekend.Im still waitting for someone to give me a link to how to tee off the factory sending unit? Any info will greatly appriciated!!!!!!
  7. B

    Chuggin

    (ICP) Injection Control Pressure. I had mine go out twice,and both times the icp was leaking oil.I have an 03 6.0 and it is located in the very back of the engine behind the turbo right next to the IPR valve.Go to forddoctorsdts.com and there is some more info on that.:sweet
  8. B

    Oil pressure gauge Installation help needed

    Hey nascar did you use an electric or mechanical gauge? Or did you use the one that screws in to the cap?:thanks
  9. B

    Oil pressure gauge Installation help needed

    Yeah im still waiting for someone to give me some info.Hopefully someone will give something before the dat is over........:thanks
  10. B

    are the 2004,2005 ,5 speed or 6

    Hey Mike Im talking about the 6spd. trany .I change my MOTOR oil every 5k and i use rotella 5-40.On my trany i change it about every 50k and i use merrcon-5:sweet
  11. B

    Oil pressure gauge Installation help needed

    I will be installing an electric oil press gauge on my 6.0 this weekend,and i need to know what fittings do i need to tee off of the factory sending unit.:thanks
  12. B

    6.0 tranny cooler

    I seen one on ebay not to long ago. Or maybe a junk yard .
  13. B

    are the 2004,2005 ,5 speed or 6

    Hey Jim i have an 03 2 wheel dr. with 3.73 rear and a 6 spd. I have 251000 on the clock and the trany is still going strong.I pull a 40ft gooseneck and it pulls great.The only thing I have done is change my oil about avery 50k and i replaced the clutch once. I get about 10-11 mpg on mine with...
  14. B

    Need New Mirrors

    Your best way to go is ebay just look under superduty and you will find just about anything you need at a cheaper price.....
  15. B

    Fuel economy upgrades

    I have an 03 with 6 spd and im getting about 10-11 mpg while im pulling my 40 ft gooseneck and loaded.I dont hot rod it although i do get on it from time to time.:thumbs
  16. B

    Fuel economy upgrades

    I have an 03 dually with 6 spd and all i can do is about 10-11 mpg when im pulling my 40 ft. gooseneck and a load. I have 373 rear and its not a 4x4. I dont really hot rod mine although i do get on it from time to time.:D
  17. B

    Egr Filter

    Im just wondering, but are you wanting to remove the egr valve?
  18. B

    04 axle

    Hey knick i think i did state that the dana 80 was on the (DRW) and the sterling was on the (SRW) or maybe i wasnt clear enough.I know for sure the dana 80 is on the rear of the duallys but im not sure what the 4x4 duallys have in the front Thanks Ill try to ask for the towboss next time im...
  19. B

    04 axle

    The drw have a dana 80 and the srw have a sterling.The dana 80 has a 10 bolt cover and the sterling has 12 bolts.The dana 80 also comes on some f450. Im still trying to find the part # for the aluminum diff. cover for the dana 80. Does any body know?:thanks
  20. B

    Odd noise from my exhaust

    My truck does the same thing I have a straight pipe and gutted out cat! Sounds good when you hear the turbo,i just dont like it when it starts to rumble a little bit.:D
  21. B

    18" Stock Wheels 2005-2008 F-250/350

    Im not too sure,I know for a fact that 05 f350 dually wheels dont fit my 03 f350.In 05 they made the discs bigger on the duallys.I wanted to put the 17" factory wheels on my truck but the bolt pattern is diffrent.
  22. B

    Ordered: 08 finned diff cover

    Hey bush thats a good price on the royal purple!Altough I still caint find the part # for the alum. cover for my (drw). If you come across any info shoot me a link.I have 03 f350 w/dana 80.All 08 models have the standard alum. cover and it will fit my truck.I ve seen a fwe at the dealer but they...
  23. B

    exhaust/muffler installation

    Hey eroll, as far as someone in you area,I caint help you.Im down here in TEXAS.Altough its not that hard to install.You might have to jack the truck up to give you some space so that you can remove and instal the new pipes.The new hanger fit in the original place as the stock exhaust. Good...
  24. B

    6.0 Straight Pipe Video

    Its sounds pretty good to me, or am i missing something????:D
  25. B

    Boost gauge

    Hey nascar,you are right, if that plastic line breaks or if its loose or tears you will loose power and have no boost. i had the same problem before.All i did was replace the broken boot and it solved the problem.

Members online

No members online now.
Total: 23 (members: 0, guests: 23)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top