Search results

  1. D

    Radio mounting bracket

    A year or so ago I had my radio and sub stolen out of my truck. I finally threw a radio in it but it is just sitting loose as I do not have the mounting bracket for the radio to attach to (you know the bracket that you have to slide the two pins in to get it out). Does anyone know a part # or a...
  2. D

    Head gaskets again????????????

    Truck was done last week, but due to other issues (son in hospital) I haven't picked it up yet. Hopefully grab it sometime tonight or tomorrow.
  3. D

    Head gaskets again????????????

    I have a bullet proof egr cooler and external oil cooler, ARP studs, 4" exhaust, Banks big hoss hoses and inter cooler (no tuner since Nov 2009, last time head gaskets failed). The rad cap is a year old. Besides the crank pulley seal they also another seal on the front, but I forgot the name of...
  4. D

    Head gaskets again????????????

    I know the cap is good. Got the burns on my arm from checking to see why it wasn't "boiling".... Going to shop around and have a diesel shop do it instead of the dealer
  5. D

    Head gaskets again????????????

    Fan pulley cracked, belt broke and damaged the lower crankshaft pulley seal. Took it to San Tan Ford to have the seal repaired. Picked truck up at 4pm on Thursday. Hooked the 5th wheel trailer up and was heading to Payson at 4PM on Friday but only made it to beeline and bush hwy (less than...
  6. D

    Oil Cooler again??????

    Quick comment. When installing the system remember to keep it clean. Also prime/fill the lines and cooler as much as possible. I will inform you all when I return how the system performed while towing my 5th wheel.
  7. D

    Engine won't start......

    Dave, thanks for mentioning the need to purge the system. This is what got me looking into the IPR. Appreciate having guys like you around
  8. D

    Engine won't start......

    She just fired up...... Happy dance. Now to top of all fluids and bolt the rest of the stuff down... Button her up so to speak
  9. D

    Engine won't start......

    Batteries are good plus I had jumpers from another car because I knew I would be cranking it for a while. I watched ICP and it is only going to 270 while cranking. Pulled IPR and the screen has a huge slit in it. So now driving back from dealership with new sensor. I will check after I install...
  10. D

    Engine won't start......

    Sill no start after many tries....
  11. D

    Engine won't start......

    Checked codes with scan gauge and no codes present
  12. D

    Engine won't start......

    Installed new oil cooler from BPD. Started truck and took a second then idled for a minute and died. Now it won't start. Any clues?
  13. D

    Oil Cooler again??????

    Finished the install. Started vehicle up, it fired ran for a few then died. Now it won't start. Any suggestions?
  14. D

    Oil Cooler again??????

    Driving from PHX to Flagstaff to pickup a horse trailer. Truck only while going up to Flagstaff I was running 245 EOT and 200 ECT. Pulled over and watched my Rad fan just barely spinning. On the way home it was dark and outside temp was lower, but the 3 horse slant bumper pull trailer sure...
  15. D

    Pic of clogged Oil Cooler

    Just wanted to share my situation and the picture I took. When members talk about these coolers clogging up they are not kidding. If you look on top of the cooler next to the 2 studs you will see the "plug" that was blocking my coolant flow.
  16. D

    Power loss during towing

    So I replaced the water pump and it wasn't the issue. I then pulled the oil cooler and found the water passage to be completely blocked. I also found my fan clutch wiring to have been cut by the fan somehow. I will be replacing that today
  17. D

    Power loss during towing

    I know it has been about a month, but I finally got to drive my own truck for once today. I finally fixed my scangaugeII to read correctly. While driving my EOT= 232 and my ECT=272 at the highest. During the drive the EOT was always 40deg lower. After stopping and lifting the hood I could spin...
  18. D

    Power loss during towing

    I will try to reset ECT settings in Scangauge and see if it reads more closer to actual. I moved to Synthetic because people said it was "better" so I am assuming this isn't my issue.... or hoping anyway. Thanks for all of your reply's past and future, this forum is great because of you...
  19. D

    Power loss during towing

    Usually I do not have any issues while towing. Last 2 trips I had a powerloss and my vehicle speed dropped to 25~30mph. It seemed to be temp related but at the time I did not have a scangauge connected. But I own one now. I was towing from AZ to San Diego (I-8) and then again I-17 Phoenix to...
  20. D

    Fixed FICM and now no clue what is wrong

    Well we got the injector installed and she idles great. Now I got a new problem.... When I get to 50+ mph and the A/T locks up in high gear I get a shudder. Like the A/T is locking and unlocking..... Any ideas?
  21. D

    Fixed FICM and now no clue what is wrong

    Sending the daughter to go pick up the parts. 1 injector and the blue fuel pressure spring kit. Tomorrow I will supervise as she does the work.....:eek: A few weeks back she did the front brakes.
  22. D

    Fixed FICM and now no clue what is wrong

    OK. Well I am going to order 1 injector and replace it this weekend. If it fixes the problem I will order 3 more and do it again....:doh: Dad owns a repair shop so I have access to all the tools and a great place to do the work. I just don't want to buy 4 injectors ($1200+) and find out it...
  23. D

    Fixed FICM and now no clue what is wrong

    Pulled codes Pulled codes last night... Thanks to a buddy with some software... P0276 #6 Inj Circuit low P0278 #6 contribution balance P0341 CPS A circuit range (bank 1 single sensor) P0528 Fan speed sensor circuit P0603 Int Control module keep alive memory..... Erased the codes...
  24. D

    Fixed FICM and now no clue what is wrong

    Updated my signature :dizzy lets see if it worked...
  25. D

    Fixed FICM and now no clue what is wrong

    New info Hooked up a scanner and cleared the codes. P0278 #6 contribution balance. So next step is to ........ Replace injector #6 and others on that bank?

Members online

Total: 128 (members: 1, guests: 127)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,628
Latest member
Svttim

Latest posts

Top