Search results

  1. E

    Trailer Tow Mirror Upgrade

    I got a set for $150 delivered. My 99 had the nontelescopic nonpower tow mirrors and I just wanted the newer ones. I wired them for the lights and heat, but did not bother with the power mirror install. They are GREAT. I have since upgraded to the projection headlights and added the Grille from...
  2. E

    Fuel Leak -- DOH!!!

    The kit from BCD came in today. Took me 45 minutes to get them in. Now there is no leak!! The orings are metric and are thicker then the Danco#90. No one had them locally, so I advise everyone who needs them- just get them from BCD! 100% perfect!!!
  3. E

    Smellin diesel??

    No, its just a little puddle. If I park the truck on an incline with the nose pointing down, it doesnt leave one. The diesel will stay sitting in the valley. Still I got to fix the leak.
  4. E

    Smellin diesel??

    I went to all the Home Depots and lowes looking for the Danco #90. None had it. I looked through all the orings I have and only had 1. I am not going to tear into it unless I have both so I just have to wait until the kit I ordered from BCD comes in. I am still ketting 20mpg even though I am...
  5. E

    Smellin diesel??

    160k miles is a long time.
  6. E

    Your Fuel Mileage

    I consistently get 20mpg mixed highway and city. I just noticed I have had a diesel leak for a while. I am sure it is gonna be a little more once I get that fixed. Very important thing, I always keep it under 2k rpm even on take off. I know I truck around like a grandpa but its ok.
  7. E

    Smellin diesel??

    O-rings are 1/2" OD, 1/4" ID, 1/8" material. Danco #90 at Home Depot. $0.39 /each or $1.25 for 5 pieces. There are two of them.
  8. E

    Smellin diesel??

    $6. That is the same exact problem I have going on right now: http://www.superdutydiesel.com/forums/showthread.php?t=1531 Well, i found my leak coming from around the release valve of the fuel filter assembly. I ordered this...
  9. E

    Fuel Leak -- DOH!!!

    The funny thing is that it is not leaking down the tube right now. It leaks out and sits on top of the motor. Nothing is coming down the tube. Must be the one oring went bad then.
  10. E

    Fuel Leak -- DOH!!!

    I really thought they would be metric. What is the width?? I have orings of that size. I think I should just wait until my kit from bcd comes in.
  11. E

    Fuel Leak -- DOH!!!

    Yeah, I always use grease on orings (assembly lube). But I mean the valve itself.
  12. E

    Fuel Leak -- DOH!!!

    I have been eyebolling this for this past couple of days and it is definitely around the release valve (behind) and not down the tube. I already ordered that kit from bcd because I was told these orings are specific. I have boxes of them, but I dont want to risk it. I am suprised that the valve...
  13. E

    Fuel Leak -- DOH!!!

    I just noticed that my truck has a fuel leak. It is leaking from around the release valve on the fuel bowl. Do you think the o-ring kit from blackcloud would correct this? All the leaked diesel stays sitting on top of the engine. The leak isnt too bad, but diesel is too expensive to waste even a...
  14. E

    Sonnax kit and Valve clips HELP!!!

    The sonnax want bad at all. I freaked out cuz estimated install time is 45minutes and it took me a couple hours, LOL.
  15. E

    Sonnax kit and Valve clips HELP!!!

    I am in south Texas. I took the truck to a friend's tranny shop.
  16. E

    Sonnax kit and Valve clips HELP!!!

    $837.59 total cost of rebuild and new tc. They put the sonnax kit in and with the other 2 springs they put in. Man it shifts better then my father in laws brand new truck. And that vibration that I thought was the ujoints again is GONE. It runs GREAT. thanks to all for putting up with me while...
  17. E

    Sonnax kit and Valve clips HELP!!!

    I stopped by to check on my baby today, and they showed my two broken clutch plates. They also told me there were some stuck/broken vlaves. This repair is gonna cost me around 1k. Couldnt have some at a worst time...
  18. E

    Odd thought

    That would be true. I never considered that as I only use cruise control on long hauls when I am running around 65.
  19. E

    Odd thought

    It does. Reson being when going up a hill the cruise control will rev the rpms pretty high to maintain speed whereas you would have to press on the pedal a little more to maintain speed. It has amazed me how much the engine gets reved up when using cc only all my fords. The mustang, explorer...
  20. E

    Sonnax kit and Valve clips HELP!!!

    I never messed with any electrical connections. Took it to the shop today. Guys hooked the scanner and it did not dump a code. They went through testing the VSS and Solenoids, and everything checked out. They are going to check into it some more and let me know. I'll keep you guys informed.
  21. E

    Sonnax kit and Valve clips HELP!!!

    Yeah, those are the animals. Ok, this morning I opened it up and took out the valve body. I went down to see friend who owns a tranny shop and he replaced the clips and replaced everything back to stock. Figured ok, its gonna work. Put the valve body in filled it with fluid, and guess what...
  22. E

    Sonnax kit and Valve clips HELP!!!

    If one of the clips fell out, then the valve would come out and not be able to built up pressure to shift. All of the clips seemed loose. The one on the modulator valve seemed homemade, which had me worried. Seems like someone lost the original and made one up. This is why I am aksing where I...
  23. E

    Sonnax kit and Valve clips HELP!!!

    I was installing the sonnax kit yesterday and everything was going fine. Today my truck will not shift out of first. I am cetain it is one of the clips that holds the valve. Does anyone know where I can get this clips? Is there anything I can use as a replacement? I called the dealer and they...

Members online

No members online now.

Forum statistics

Threads
30,516
Messages
266,069
Members
14,628
Latest member
Svttim
Top