05-06 FRONT END

[Strokin05]

Anyone due a conversion from an 03 or so front end to an 05-06 model front end.??? what all is required besides the grille and and bumper? -popcorn
Thank you,
Mike

 

[Mike K]

Mike,
Check out silverado3500's truck, his is a 2000 with the 05-06 front end: http://www.superdutydiesel.com/forums/showthread.php?t=3851&page=2
(scroll down)

I would send him a message

-Mike

 

[Crumm]

You need:

Complete set of bumper brackets
Chrome Bumper
Cover between Bumper and Grille
Grille
Grille Header Panel
Both Headlamps
Harness to connect new bulbs
Valance

Powerstroke Shop sells a complete kit for $1500 including shipping.

 

[Strokin05]

Thanks for the info, I will be doing this in the near future

 

[silverado3500]

Search on ebay for the front bumper, you can usually get a pretty good deal on a new take-off bumper there. I paid around $275 shipped for a complete bumper, bumper cap, and all of the brackets including fog light brackets. All I had to do was repaint the plastic cap to match my non-stock paint.

Installation is very straight forward, the most time consuming part is soldering in the new headlamp harness. Took me about 3 hours start to finish.

 

[Big K]

Here is the full parts list that you will need.

http://www.northtexaspowerstrokes.com/mods/2005headlights/

 

[Strokin05]

Thanks for the info guys, I appreciate it. This will be coming in the near future!

 

[fgtex]

powerstrokeshop.com sells a complete conversion kit for $1500. But like mentioned above, you could probably ebay it for less.

fgtex

 

[Big K]

Yea, that is a little high I think and can probably peice togeather with for under $1000 easy.

 

[Big K]

HUH????

1820.42 is what is striked thru