May 16, 2014 #1 B butch2000 Full Access Member Joined Jul 9, 2012 Messages 73 Reaction score 0 Location michigan I have the balance codes for 1 and 3 injectors , is it hard to change those 2 ?
May 24, 2014 #2 JLDickmon ursus combibo Joined Jun 22, 2006 Messages 4,173 Reaction score 12 Location 49041 DaveBen is the resident 6.0 guru..
May 24, 2014 #3 DaveBen SDD Senior Member Joined May 31, 2005 Messages 9,622 Reaction score 81 Location Ukiah, California I have not changed any injectors in my 6.0, so I can't tell you if it is difficult. I suspect it is not difficult. Dave
I have not changed any injectors in my 6.0, so I can't tell you if it is difficult. I suspect it is not difficult. Dave
May 25, 2014 #4 S sbiggi SDD Junior Member Joined Nov 29, 2008 Messages 45 Reaction score 0 Location Englewood, CO It is not that hard. There are some good videos on youtube. I picked up new valve cover gaskets as well when doing them.
It is not that hard. There are some good videos on youtube. I picked up new valve cover gaskets as well when doing them.
