edge gauges

Discussion in '7.3L PowerStroke Power & Performance' started by predatorproof2, Mar 27, 2021.

  1. predatorproof2

    predatorproof2 SDD Junior Member

    Age:
    51
    Messages:
    1
    Likes Received:
    0
    Joined:
    Mar 27, 2021
    Location:
    US
    I try to make this long story short. 2000. 7.3. purchased 2 months ago. Previous owner was going to fully restore. Very lucky to find this.
    I took it in for back up camera. Now the air bag light is on and the insight, edge guages weren't working at all. I had to input VIN, reboot, etc. Now all setting have changed and boost won't read. For 2 months, the boost was very sensitive. .3-.4 idling. Now, it's just 0 unless under a load. Then it will read 2-3 then jump back to 0.
    Any suggestions appreciated.

    Matt
     
  2. troutwest66

    troutwest66 6.0- The Dark Side!

    Messages:
    216
    Likes Received:
    27
    Joined:
    Apr 5, 2005
    Location:
    Post Falls, Idaho
    I have the Edge CTS2 monitor in my '04. Is yours giving any codes? If nothing there I would contact Edge (probably would anyway) and get the truck scanned. I know the 7.3 doesn't have as much going on as the 6.0 as far as electronics but that's a good place to start. Could be a connection or sensor somewhere with the airbag light on. Good luck. I hate electrical gremlins.

    Sent from my Moto G (5) Plus using Tapatalk
     

Share This Page