Shifter shifter engage problem

[mspainting]

Great Forum
I have 2000 f 550 replaced bushings in shifter rod because it wouldnt go into park properly, I would have 2 put in n 2 get it to turn over. Now I still have 2 put in N and I have 2 play with it 2 get it in D. I'm trying 2 figure out how 2 adjust transmission. It dosent seem 2 have a cable adjustment somebody said u take the cable off at trans & adjust the dohicky on trans but have no idea how 2 do this
Thx

 

[mspainting]

alright i finally found the solution i thought it was on trany, but it was under dash
here is the link
How to Fix Ford Expedition not Going into Park. Not engaging Park f150 f250 f350 E350 ranger - YouTube
thx

 

[WD40]

Glad you were able to fine out how to fix it.
Thanks for posting.
Doug

 

[iracemine]

my three screws holding that back plat to the shifting rod where loose too. SoI tightened them then tested it and it still was sloppy. So I replaced the rod and the tube and now the shifter feels like the day I bought the truck.

 

[mspainting]

yeh i had already changed the black spacers and it was real sloppy so i looked and looked and found that youtube video, this is a great site (super duty) and i have got lots of good info from it

thx michael