rammertide07
Full Access Member
How do you do this mod to use it as an exhaust brake? any bad side-affects??? Thanks
EBP Valve mod...
- Thread starter rammertide07
- Start date
bigfred
SDD Junior Member
are you talking about the ebp actuator located in the pedetsal.
Doing that EBPV mod doesn't give you an "Exhaust Brake" like the ones available that basically.. Shut off.. the exhaust flow.... Slowing you down... with Minimal braking
What this mod Does do: instead of the PCM controlling the EBPV (for a faster warm up.. it's intended purpose) You can Manually, with a switch, control the EBPV. Doing that.... >Somewhat restricts< the AIR to the turbo.. Holding you back [JUST a BIT], for >Less< braking..
It's more like a Retarder.. of sorts. (All this is a Need To Know Factoid)
Works best on the 6 speeds @ RPMs over 2K, but Many of the Auto guys say it works well for them too.
I have it on my 2K.. I like it. Once you learn it's capabilities.. It HELPs, get'n down a hill.
Did it with a Plug'n Play Kit, I got off EBAY. 75 bucks, IIRC.
No bad side effects that I've seen, in the 120K I've used the H**L out of it in
rammertide07
Full Access Member
Doing that EBPV mod doesn't give you an "Exhaust Brake" like the ones available that basically.. Shut off.. the exhaust flow.... Slowing you down... with Minimal braking
What this mod Does do: instead of the PCM controlling the EBPV (for a faster warm up.. it's intended purpose) You can Manually, with a switch, control the EBPV. Doing that.... >Somewhat restricts< the AIR to the turbo.. Holding you back [JUST a BIT], for >Less< braking..
It's more like a Retarder.. of sorts. (All this is a Need To Know Factoid)
Works best on the 6 speeds @ RPMs over 2K, but Many of the Auto guys say it works well for them too.
I have it on my 2K.. I like it. Once you learn it's capabilities.. It HELPs, get'n down a hill.
Did it with a Plug'n Play Kit, I got off EBAY. 75 bucks, IIRC.
No bad side effects that I've seen, in the 120K I've used the H**L out of it in
Thanks...do you know where there are some links about how to do it and what I need?
IIRC, a few guys here on SDD have fab'd their own versions.. but the Kit I have, had it all pre-wired, you plug it into the EBPV connection, the Brake switch and Go pedal... yer good to go.
You could look around on EBAY for it.. or do a Search here..
Joe
You could look around on EBAY for it.. or do a Search here..
Joe
Last edited:
donpupera
SDD Junior Member
cheapassdiesel.com sells them for around 100 to 150 and they do work. I use one on a 2000 F 250 towing up to 12000 lbs.and it helps braking. Not like a full fledge exhuast brake but it will help slow you down. They say no harm when used. Just know your limtitaions. They also sell a torque lock-up that you can install in conjunction with the brake and have better results.
rammertide07
Full Access Member
nswsparky
All my stuff
I know this post is a little old but I found a company that makes this module for a fairly affordable price. DFUSER Diesel Performance Products Exhaust High Performance Part Diesel Intake Diesel Power Chips
$130 with an on off switch and status LED's
$130 with an on off switch and status LED's
